11
NOTICE:
Press the 'FLAME' button on the unit for 3s at least to cancel
the beeps.
The heater can be turned on without the flames. The red LED
indicators will turn on for 10s (one for low heating and two for
high heating), and the 3rd mood light at 5% brightness will keep
on.
The blower will turn on 10s before the heater is on and turn off
10s after the heater is off.
•
•
•
Flame
Mood Light
Crackling
Timer
Flame Speed
Heater
Temperature
Press to cycle through 4 flame effects
and off .
Press to cycle through 5 cracking and
Press to set the timer from 0.5H to
9.0H and
Press to cycle through 5 flame
speeds.
Press to cycle through Low – High –
o
ff.
Press to cycle through 9 mood light
and off .effects
Press to set the room temperature
from 60 °F - 84 °F (16 °C - 28 °C) and
Hold for 3 seconds to change the
unit between °C and °F.
off.
off.
off.
To Next Page
Loading...
