12
Cleaning
Metal:
Glass:
Plastic:
Maintenance
6. CARE AND MAINTENANCE
ALWAYS turn the heater OFF and unplug the power
cord from the outlet before cleaning, performing
maintenance, or moving this fireplace. Fail to do so
could result in electric shock, fire, or personal injury.
NEVER immerse in water or spray with water. Doing so
could result in electric shock, fire, or personal injury.
using a soft cloth, slightly dampened with a
citrus
oil-based
product.
DO NOT use brass polish or household cleaners as these
products will damage the metal trim.
Buff
•
•
Use a good quality glass cleaner and dry thoroughly with a
paper towel or lint-free cloth.
NEVER use abrasive cleansers, liquid sprays, or any cleaner
that could scratch the surface.
•
•
Wipe gently with a slightly damp cloth and a mild solution of
dish soap and warm water.
NEVER use abrasive cleansers, liquid sprays, or any cleaner
that could scratch the surface.
•
•
Vents:
Use a vacuum or duster to remove dust and dirt from the heater
and vent areas.
Clean the exterior of the fireplace with a slightly damp cloth or
duster.
•
•
To Next Page
Loading...
