3
this heater.
• NEVER plug this heater into an outlet that is old, cracked, or
has any loose wires or connections. Plugging this heater into a
faulty outlet could result in electric arcing within the outlet
that could cause the outlet to overheat or catch fire.
• ALWAYS check your heater cord and plug connections with
each use!
1. MAKE SURE the plug fits ti g ht in the outlet! Faulty wall
outlet connections or loose plugs can cause the outlet to
overheat.
2. Heaters draw more current than small appliances.
Ov
erheating may occur even if it has not occurred with the
use of other appliances.
3. During use check frequently to see if the plug outlet or
faceplate is HOT!
4. If the outlet or faceplate is HOT,discontinue use immediately
and have a qualified electrician inspect and/or replace the
faulty outlets.
This heater has a three-blade grounding type plug as show in
below picture. If there is a two-slot receptacles only, an adapter
should be used for connecting three-blade grounding type plugs.
The grounding lug extending
from the adapter must be
connected to a permanent
ground such as a properly
grounded outlet box by a
metal s crew. T he a d apte r
should not be used if a three-
slot grounded receptacle is
available.
SAVE THESE INSTRUCTIONS!
Adapter
Grounding Pin
Metal Grounding
Screw
To Next Page
Loading...
