EasyManua.ls Logo

Legend Flame EF290A - Operation Instruction

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
2. Plug in
Make sure the plug is plugged very tightly and NO other appliances
should be plugged onto the same circuit.
3. Insert into the Opening
This unit does not require any special venting. It is recommended to install
it in an opening with the following Minimum dimensions for Best flame
effect to see:
A. 23 23/26" (605mm) wide
B. 22 1/8" (561mm) high
C. 11 7/16" (291mm) deep
5. OPERATING INSTRUCTIONS
WARNING! Do not operate the unit if it is damaged or has
malfunctioned. If you suspect the unit is damaged, call a
qualified service technician to inspect and replace any part of
the electrical system if necessary.
Read and understand this entire owner’s manual, including all
safety information, before plugging in or using this product.
Failure to do so could result in electric shock, fire, serious
injury, or death.
A
B
C