ASSEMBLING THE PEDALS
The pedals have a special adjustment system. When assembling them, you should make sure you have selected the
right pedal for its crank: we place the right pedal on the right crank, indicated with the letter R (Right); and the le pedal
on the le crank, indicated with the letter L (Le).
Check that the holes are free of obstacles and, if possible, add some grease. Always screw the pedals onto the crank in
the direction of pedalling. Try not to force the screw as it could damage the threads and make them unusable.
Use a 6mm Allen key or 15mm wrench to screw the pedals onto the cranks.
Recommended tightening torque: 35 Nm
To Next Page
Loading...