14
[EN]
Location of charging
Open de cover
Connect the charger
Use only the original charger to charge the battery, otherwise the
battery and electronic devices will not be covered under warranty.
CHARGING THE BATTERY
Before using your bike for the rst time, you should charge the battery for 4 to 6 hours using
the included charger.
1. Connect the charger to the socket. You will notice that the charger light turns green,
meaning that the unit is working properly.
2. Connect the charger to the battery. The charger light turns red while the battery is
charging. Remember that you can charge your battery while it is inside the bicycle through
the connector on the le side of the frame, or charge it o the bike if you prefer.
3. When the battery is fully charged, the charger light will return to the initial green colour.
4. To disconnect the charger, it is recommended rst to disconnect the battery and then the
power socket.
5. With the battery fully charged, the charging time is between 6 to 8 hours and will always
be dependent on the use given to the bicycle.
6. Electricity consumption in each battery charge is from 288 to 504Wh depending on
battery model.
7. Do not cover the charger or the battery during the charging process.
GETTING STARTED_
To Next Page
Loading...
General