Install as is on top of your structure, the rightmost ladder
pieces at the front and at the back to the left of the left 4x2
curved pieces at the front and at the back. Lay aside.
Bag 36. Make the left end of the roof.
Number 1.
Put a F 6x4 ver on the table.
Put a F 6x1 ver to the right.
Number 2.
Connect by putting a F 2x1 hor on the right end of the front
edge. Repeat symm at the back.
Put a FS 4x1 hor to the left, overhanging to the left. Repeat
symmat the back.
Put a F 3x1 hor on the second row from the front, starting at the
right. Repeat symm at the back.
Number 3.
Put a F eight-button pizza piece to the right of the front three
rows of the 6x4 piece, its right front button under the
overhanging end of the FS 4x1, the curved corner to the left and
to the front.
Repeat symm at the back.
Number 4,
Put a FS 4x4 with four buttons ver on top, skipping the left
edge, in the middle, the buttons to the right.
Number 5.
Put a three-sided S piece ver to the right, the slide to the
right.
Number 6.
Put a F 2x1 from a sep bag hor on the second row, at the right.
Repeat symm at the back.
Number 7.
Put a FS 4x2 ver on tops of the two PPs.
Install this part as is on the roof, to the left of the ladder
To Next Page
Loading...
