LEGRAND KEOR LP - Page 5

29
KEOR LP 1, 2, 3 kVA
EN
LED
Indicator
Symbol Description
Normal
Mode LED
1
2
1. Steadily on indicates normal utility voltage. Blinking indicates
insucient utility voltage for the full load. O indicates abnormal
utility voltage.
2. In Battery/Load Test Mode indicates battery capacity
is 50%.
Battery
Mode LED
1
2
1. Indicates load supplied by battery power.
2. In Battery/Load Test Mode indicates battery capacity
is 25%.
Bypass
Mode LED
1
2
1. Indicates load supplied by bypass.
2. In Battery/Load Test Mode indicates battery capacity
is 75%.
Battery
Bad/Weak
LED
1
2
1. Indicates low battery power or faulty battery bank.
2. In Battery/Load Test Mode indicates battery capacity
is 100%.
Fault LED
1
2
1. Steadily on indicates fault or abnormal condition.
2. Blinking indicates LED Panel in Error Code Function Mode.
Overload
LED
1
2
1. Indicates UPS is overloaded.
2. In Error Code Mode indicates Error Code 16.
Site
wiring
fault LED
1
2
1. Indicates live and neutral lines are connected wrongly or high
neutral-ground voltage.
2. In Battery/Load Test Mode indicates load capacity is 100%.
3. In Error Code Mode indicates Error Code 8.
Outlet1
LED
1
2
1. Indicates UPS Outlets 1 are enabled and ready to supply loads.
(This function is optional.)
2. In Battery/Load Test Modeindicates load capacity is 75%.
3. In Error Code Mode indicates Error Code 4.
Load
LED
1
2
1. Indicates UPS outlets are enabled and ready to supply loads.
2. In Battery/Load Test Mode indicates load capacity is 50%.
3. In Error Code Mode indicates Error Code 2.
Outlet2
LED
1
2
1. Indicates UPS Outlets 2 are enabled and ready to supply loads.
(This function is optional.)
2. In Battery/Load Test Mode indicates load capacity is 25%.
3. In Error Code Mode indicates Error Code 1.