Need help?Do you have a question about the LEGRAND KEOR SPX 800VA and is the answer not in the manual?
General| Power Capacity | 800 VA |
|---|---|
| Output Power | 480 W |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Technology | Line Interactive |
| Communication Port | USB |
| Waveform | Simulated Sine Wave |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 0-95% non-condensing |
| Frequency | 50/60 Hz |
| Battery Type | Sealed lead-acid |
| Typical Recharge Time | 6 hours |
| Outlets | 4 x IEC 320 C13 |
| Transfer Time | 4-8 ms |
| Backup Time | 5-10 min (depending on load) |
Important instructions and warnings for installation, operation, storage, and maintenance of the equipment.
Precautions when working with batteries due to electrical shock and short circuit risks.
Guidelines for proper disposal and handling of batteries to prevent hazards like explosion or chemical harm.
Verify all UPS unit components and accessories are included in the package.
Procedure to connect the UPS to the main AC power source for charging and operation.
How to connect devices to the UPS battery backup outlets for protection.
Optional steps for connecting the UPS via USB and installing management software.
Instructions for turning the UPS on/off and performing a cold start.
Explanation of LED lights and their meanings for UPS status and alarms.
Solutions for when the UPS LED does not illuminate, including power and battery checks.
Troubleshooting steps for when the UPS continuously operates on battery power.
Resolving continuous beeping sounds from the UPS, often indicating faults or low battery.
Diagnosing and fixing issues causing the UPS to provide insufficient backup power duration.
To Next Page