LEGRAND RJ45 - User Manual

LE12415AA
RJ45、RJ11 socket
Presentation
This product should be installed in compliance with installation rules, preferably by a qualified electrician.
Safety instructions
Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions.
All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or
repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
-20 ...+70
-5 ...+50
≥40mm
Wiring
UTP STP
UTP STP
Cat 5e
Cat 6
EIA 568 A
1 2 3 4 5 6 78
1 2 3 4 5 6 78
EIA 568 B
Peel off outer sheath about 50mm in length.
50 mm
U/UTP
Turn the lock according to the direction
shown in the diagram to separate the cover.
2 811 58xx/2 811 59xx/2 811 60xx/2 811 61xx/2 811 62xx xx:MW MB MG DS DB CH BA BB BC
2 811 58xx yy/2 811 59xx yy/2 811 60xx yy/2 811 61xx yy/2 811 62xx yy
2 811 63xx/2 811 64xx/2 811 65xx/2 811 66xx yy:MY SG
2 811 63xx yy/2 811 64xx yy/2 811 65xx yy/2 811 66xx yy
1

Summary

Safety Instructions

General Safety Guidelines

Important safety precautions for installation, handling, and authorized repairs.

Product Presentation

RJ45 Sockets

Displays various RJ45 socket configurations.

RJ11 Sockets

Displays various RJ11 socket configurations.

RJ45+RJ11 Combination Sockets

Displays RJ45 and RJ11 combination socket configurations.

Operating Temperature Ranges

Shows operating temperature ranges for the products.

Minimum Cable Length Requirement

Indicates a minimum cable length requirement of >40mm.

Wiring Instructions

RJ45 Socket Wiring

Details wiring for RJ45 sockets, including UTP/STP and Cat 5e/Cat 6.

Wiring Standards (EIA 568)

Illustrates wiring according to EIA 568 A and EIA 568 B standards.

Shielded Twisted Pair (STP) Wiring

Details wiring for Shielded Twisted Pair (STP) connections.

RJ11 Socket Wiring

Details wiring for RJ11 sockets, including 2-core and 4-core connections.

Product Installation

Mounting the Socket

Illustrates the process of mounting the socket into a wall plate.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Legrand RJ45 and RJ11 socket, a device designed for network and telephone line connections.

Function Description

The Legrand RJ45 and RJ11 socket serves as a termination point for network cables (RJ45) and telephone lines (RJ11), allowing for structured cabling installations. It supports both unshielded twisted pair (UTP) and shielded twisted pair (STP) cables for RJ45 connections, and standard telephone lines for RJ11. The device facilitates the connection of network devices and telephones to the building's wiring infrastructure. It is designed for ease of installation and reliable performance in various environmental conditions.

Important Technical Specifications

The product series covered include 2 811 58xx/2 811 59xx/2 811 60xx/2 811 61xx/2 811 62xx, 2 811 63xx/2 811 64xx/2 811 65xx/2 811 66xx, and their 'yy' variants (e.g., 2 811 58xx yy). The 'xx' suffixes denote different models such as MW, MB, MG, DS, DB, CH, BA, BB, BC, while 'yy' suffixes refer to MY, SG.

Environmental Operating Conditions:

• RJ45/RJ11: Operates effectively in temperatures ranging from -20°C to +70°C.
• RJ11 only: Operates effectively in temperatures ranging from -5°C to +50°C.
• Minimum cable length: Supports cable lengths of 40mm or more.

Compatibility:

• RJ45: Supports Cat 5e and Cat 6 cables for both UTP and STP configurations.
• Wiring Standards: Compatible with EIA 568 A and EIA 568 B wiring standards for RJ45 connections.

Usage Features

Installation Process (RJ45 Socket):

1. Preparation: Peel off the outer sheath of the cable by approximately 50mm.
2. Disassembly: Turn the lock mechanism to separate the cover from the main body of the socket.
3. Wiring (EIA 568 A or B): Insert the twisted pairs into the presser cover, ensuring all wires are pressed in according to either EIA 568 A or EIA 568 B standards.
4. Trimming: Cut out any excess thread from the wires.
5. Reassembly: Recombine the cover with the module and rotate the lock to secure it in the locking position.

Installation Process (RJ11 Socket):

1. Preparation: Strip the outer sheath of the telephone line by approximately 20mm.
2. 2-Core Connection: For a 2-core phone line, insert the line into slots 4 and 5 of the IDC terminal, then flip the cover.
3. 4-Core Connection: For a 4-core phone line, insert the line into slots 3, 4, 5, and 6 in the order of black, red, green, and yellow, then flip the cover.
4. Securing: Press the cover to allow the wire into the clip, then cut off any excess ends.

General Installation:

• The product is designed for installation in compliance with local installation rules.
• It is recommended that installation be carried out by a qualified electrician.
• Users should read the instructions and consider the specific mounting location before installation.

Maintenance Features

Disassembly for Maintenance or Removal (RJ45):

• To remove the cover, gently pry it open using a small screwdriver at the designated position. This allows access to the wiring for inspection, modification, or removal.

Wire Removal (RJ11):

• To remove a wire from the RJ11 socket, push the wire in slightly and then pull it up.

Safety and Warranty:

• The device should not be opened, dismantled, altered, or modified unless specifically required by the instructions.
• Any opening or repair of Legrand products must be performed exclusively by Legrand-trained and approved personnel. Unauthorized opening or repair will void all liabilities and rights to replacement and guarantees.
• Only Legrand brand accessories should be used with this product to ensure proper function and maintain warranty validity.

LEGRAND RJ45 Specifications