_________________________________________________________________________
________________________________________________________________
Doc No. FM0828 V1.04 Page 3
Registering the Pendant onto a Carer Response
Refer to the Carer Response
user manual for full details of
the button functions and how
to navigate the menus.
From the Main menu select
Programming.
From the Programming menu select
Add transmitter.
The display will prompt you to Activate the transmitter…
Press the pendant.
The Carer Response will beep and the display will change to
the Add transmitter menu with a box showing No ID.
Press then to select Room, then press
Press to select the room number box 0000.
Press to select the first digit, press to move between
the digits and press or to change each digit.
Press when the correct room number is displayed.
Press to select the alarm type box None.
Press then to select Trigger then press
Press the button to select Save then press
The display will show Radio ID saved to memory…
Return to the Main menu and select Quit.
Press the pendant to check operation.
Declaration of Conformity
We declare this product complies with the
relevant UK legislation on condition that it is
used in the manner intended, and in
accordance with the current installation
standards and/or the manufacturer's recommendations. A
copy of the full UKCA Declaration of Conformity is
available on request.
We declare this product complies with the
relevant European legislation on condition that
it is used in the manner intended, and in
accordance with the current installation standards and/or
the manufacturer's recommendations. A copy of the full
CE Declaration of Conformity is available on request.
Chris Dodd
CEO
Legrand Assisted Living & Healthcare
To Previous Page
Loading...
