18
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com
LEHLE DUAL EXPRESSION WITH A KEMPER™ PROFILER™ HEAD / PRO-
FILER™ STAGE
By means of the additional 10K socket as
a switching output, it’s very easy and flex-
ible to control the KEMPER™ PROFILER™
devices. This way you can activate and
deactivate, e.g. the Wah pedal or any
other eects in the KEMPER™.
How to do this:
1. At the LEHLE DUAL EXPRESSION the
LEDs of RTS and TRS should be both on.
This way the Polarity Autodetection is ac-
tive.
In order to use the switching function of
the 10K socket, its function must be ac-
tivated. Hit the 10K button (6), until the
LED flashes blue, so the LEHLE DUAL
EXPRESSION provides the momentary
switch function when the rocker is in toe
position.
2. Connect the 50K socket with a TRS ca-
ble to the expression pedal input socket
of your KEMPER™.
3. After the LEDs of RTS and TRS now
have started and stopped flashing, the
LEHLE DUAL EXPRESSION has selected
the correct polarity automatically.
4. Connect the 10K socket with a TRS
cable to the expression pedal 2 / switch
input socket of your KEMPER™.
5. Move the rocker of the LEHLE DUAL
EXPRESSION.
6. In the settings of your KEMPER™ you
can select which parameter should be
controlled.
7. There you go!
DEVICE CONNECTIONS
50K KEMPER™ pedal input
KEMPER™ pedal 2 / switch
input
10K
KEMPER™ and PROFILER™ are registered trademarks of Kemper GmbH
To Next Page
Loading...
