15
musicians.
This way the tuner is not in the direct signalpath
and is isolated electrically from your amp.
How to do this:
1. Connect your tuner to the output socket A (5) of
the Lehle Little Dual.
2. Connect the amplifier to output B (3) an.
3. Do not use the input socket A (2).
4. Connect your instrument to the input socket A/B
(1) of the Lehle Little Dual.
5. Use the ground lift switch (6) to determine
which position eliminates the most background
noise.
6. There you go!
Troubleshooting
Something is rattling inside my unit
If you should happen to shake the Lehle Little
Dual you will hear a slight metallic rattling from
inside. This is a mechanical noise caused by a flat
spring which diverts the force of the True Bypass
switch button on to the horizontal slide switch in-
side the Lehle Little Dual. So this is not a defect,
not a problem, just a healthy indication that the
spring is not jammed.
Device connections
Output A (5) Tuner
Output B (3) Amplifier
Input A (2)
–
Input A/B (1) Instrument
To Next Page
Loading...
