EasyManua.ls Logo

Lehle P-SPLIT III - Introduction

Lehle P-SPLIT III
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com
The LEHLE P-SPLIT III combines passive
splitting with the highest possible signal
fidelity.
Its applications range from splitting sig-
nals and eliminating hum, to balancing
and re-amping along with any signal
routing that requires a clean signal free
from noise.
At its core is the high-end LEHLE TRANS-
FORMER HZ, which galvanically isolates
the two outputs, eliminating any possibil-
ity of ground loops. The LEHLE TRANS-
FORMER HZ was specially designed for
use with high-impedance signals but also
splits low-impedance signals with un-
compromising sound quality. The signal
can be picked o either symmetrically or
asymmetrically from the ISO output.
By using the phase inverter switch with
gold-plated contacts you can flip the sig-
nal phase at the ISO output, preventing
phase cancellation from impairing signal
reproduction.
The classic application for the LEHLE P-
SPLIT III is splitting an input signal to two
outputs, enabling you to connect an in-
strument to two devices, which may, for
example, be two amplifiers, or an amp
and a mixer/recording unit (PC/DAW).
Thanks to its ability to pick o the bal-
anced signal on the ISO output, the LEH-
LE P-SPLIT III is also eminently suitable for
use as a high-quality compact DI box for
all types of signal.
Another useful application for the LEHLE
P-SPLIT III is as a hum suppressor. Fre-
quently background noise, caused by
ground loops occurs when two electronic
devices are connected to each other. The
LEHLE P-SPLIT III provides a simple, but
extremely eective remedy when installed
between the two units. Using the ISO out-
put, the devices are galvanically isolated
and background noise becomes a thing
of the past.
You can even use the versatile LEHLE P-
SPLIT III as a passive mono summing unit
for a stereo signal by using the DIR output
as second input.
And just in case you are looking for a
power connection: the LEHLE P-SPLIT
III performs all its functions without any
need for a power supply.
INTRODUCTION

Related product manuals