Lehle P-SPLIT STEREO - Page 19

19
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com
LEHLE P-SPLIT STEREO AS REAMPLIFICATION BOX
Once you’ve recorded the dry signal, it
can be fed through an amplifier during
mixing; connecting the amp to the sound
card or DAW will almost certainly gener-
ate a ground loop, causing undesirable
noise.
This problem can be eectively eliminat-
ed using the LEHLE P-SPLIT STEREO.
The built-in LEHLE TRANSFORMER HZ
galvanically isolate the ground connec-
tions, and function perfectly with both
balanced and unbalanced signals from a
sound card or a DAW.
By means of the LEHLE P-SPLIT STEREO
it’s now possible to use two amplifiers at
the same.
HOW TO DO THIS
1. Connect the output of your audio in-
terface to the input socket R of the LEHLE
P-SPLIT STEREO.
2. Connect the R ISO socket to the input
of your first amp.
3. Connect the L ISO socket to the input
of your second amp.
4. Use the ground lift switch (4) to deter-
mine which position eliminates the most
background noise.
5. There you go!
DEVICE CONNECTION
Output audio interface
Input amplifier 2
Input amplifier 1
R
R ISO
L ISO