Need help?Do you have a question about the Leica CM1850 UV and is the answer not in the manual?
General| Type | Cryostat |
|---|---|
| UV Disinfection | Yes |
| Microtome Type | Rotary microtome |
| Illumination | LED |
| Section Thickness | 1 μm to 60 μm |
| Specimen Cooling | Peltier cooling |
| Defrosting | Automatic |
| Voltage | 230 V |
| Blade Type | Disposable or reusable blades |
Explains warnings, notes, and caution symbols used throughout the manual for user guidance.
Specifies that only trained laboratory personnel should operate the instrument.
Details the intended applications of the Leica CM1850 UV cryostat in biology, medicine, and industry.
Refers to the specific instrument type covered by the manual and its identification plate.
Covers essential safety features, operating precautions, and cleaning/disinfection guidelines.
Details installation requirements, microtome removal, and general maintenance procedures.
Specifies environmental and location criteria for installing the cryostat to ensure optimal performance and safety.
Details safe handling, movement, and handwheel assembly for the instrument.
Lists the components included in the standard delivery package of the Leica CM1850 UV cryostat.
Covers connecting power and performing initial checks before operating the instrument.
Provides an overview of the instrument, its power switch, and how to turn it on.
Details the buttons and functions of the primary control panel for basic operations.
Explains setting values, defrosting, Peltier element, and display lock features.
Details the functions of the second control panel for specimen movement and coarse feed.
Guides users on the process of freezing specimens using the quick freeze shelf or heat extractor.
Covers specimen handling, sectioning, and temperature selection chart guidance.
Explains defrosting procedures and daily/long-term shutdown protocols.
Lists common error codes displayed on the panel and suggests remedies or service calls.
Explains the function of the temperature control button and potential causes for instrument shutdown.
Addresses common problems encountered during operation and provides solutions.
Details daily cleaning and spray disinfection methods for the cryostat.
Covers general maintenance, microtome removal, cover removal, and reinstallation.
Provides instructions for replacing fuses and lamps (UVC and standard).
Lists part numbers for standard accessories and components available for ordering.
Details optional accessories like heat extractors and thermal blocks to enhance functionality.
Outlines the warranty coverage and terms provided by Leica Biosystems.
Provides contact details and required information for technical service or replacement parts.
Instructs on the proper disposal of the instrument and its components according to local laws.
To Next Page
