Need help?Do you have a question about the Leica CM1860 UV and is the answer not in the manual?
General| Type | Cryostat |
|---|---|
| Section Thickness | 1 µm to 100 µm |
| Display | LCD |
| UV Disinfection | Yes |
| Illumination | LED |
| Power Consumption | 600 W |
| Specimen Retraction | Yes |
| Power Supply | 50/60 Hz |
Provides critical safety guidelines and general warnings for instrument operation.
Highlights responsibilities and crucial safety reminders for operation.
Lists and describes the instrument's integrated safety features.
Detailed instructions for operating the handwheel locking mechanism safely.
Explains the proper use of the safety guard for blade protection.
Key safety practices for operating the cryostat and handling blades.
Specifies essential requirements for the instrument's installation location.
Step-by-step guide for safely unpacking the cryostat from its packaging.
Instructions for safely moving the instrument to its final installation location.
Guidelines for connecting the instrument to the power supply safely.
Essential checks and preparations before powering on the instrument.
Explains the operation of the instrument's power switch and circuit breaker.
Step-by-step instructions for safely powering on the instrument.
Describes the buttons and functions available on the primary control panel.
Introduces the process of setting various operational parameters.
Steps to set and adjust the desired temperature of the cryochamber.
How to adjust and set the desired section thickness for cutting.
Explains the controls for moving the specimen head away from and towards the knife.
Detailed guide covering preparation and execution of the sectioning process.
Instructions on how to properly freeze specimens for sectioning.
Steps for preparing the instrument for sectioning, including holder insertion.
How to correctly insert and clamp the blade or knife holder base.
Guide to adjusting the clearance angle for optimal sectioning results.
Detailed procedure for inserting both high and low-profile blades.
Instructions for safely removing blades from the holder.
Guide to adjusting the anti-roll guide for precise sectioning.
Procedures for safely inserting and removing the knife.
Steps for preparing the specimen by trimming before sectioning.
Recommended chamber temperatures for various tissue types.
Comprehensive steps for finishing daily operations and securing the instrument.
Lists error codes, their causes, and recommended remedies for display issues.
Common problems like frost, ice, section defects, and their solutions.
Safety instructions and steps for replacing instrument fuses.
Procedures and safety precautions for replacing the UVC lamp.
To Next Page
