Leica Digilux 3 Software Installation Guide

Installation instructions for the firmware 2.0 for the
LEICA DIGILUX 3
Dear Customers,
By installing the firmware you can enhance the LEICA DIGILUX 3’s operation, and often, ensure compatibility
with newly marketed accessories.
Update Contents
Model Number DIGILUX 3
Update Version 2.0
Update File Name/
Size
For Windows: DL3_200.exe / 1.43 MB or 1.509.276 Bytes
(After self-extract, DL3___200.bin)
For Macintosh: DL3_200.zip / 1.38 MB or 1.455.464 Bytes
(After extract, DL3___200.bin)
Improvements
Date/Version Description of changes
2007/6/15
Version 2.0
1. Addition of a multiple exposure function.
2. Addition of a "panning mode"(MODE3) to the optical image stabilizer.
3. Addition of a "low-angle" viewing mode that makes it easier to view the LCD
display when the camera is held below eye level.
4. Addition of a feature that simplifies setting the aperture when using a lens
without an aperture ring.
5. Addition of two manual white balance settings to GUI. GUI design uses
navigational cursor to easily select and set white balance (WB) to change the
color temperature, or set the ISO sensitivity or flash mode.
The time restriction for making changes was removed.
6. Addition of a "HOLD" option to Auto Review mode, enabling continuous
viewing.
7. Addition of a feature to playback mode. It is now possible to select the
preceding or the next images while the image is still enlarged (zoom
function).
8. Addition of the [AUTO] option for setting the ISO sensitivity in the aperture-
[A] and shutter speed-priority [S] modes.
9. Addition of a GUI option to easily check the firmware version.
10. Improvement of the performance of the AE (Auto Exposure) and AWB (Auto
White Balance) functions.
11. It is now possible to continue shooting while RAW photo data is being saved.
12. Improvement of the focusing performance when shooting low-contrast
subjects.
13. Improvement of the white balance (WB), i.e. color rendition when shooting
situations with high- or low-color-temperature lighting.
14. Improvement of the precision of the AE (Auto Exposure) function when using
faster than F2.0 lenses.
15. The A (aperture priority) mode is now also available when e.g. Leica R lenses
are being used with the Leica R/D lens adapter.
Instruction manual for LEICA DIGILUX 3 Firmware Update 2.0
Leica Camera AG / Page 1 of 6 / As at June 2007

Leica Digilux 3 Specifications

General

Camera type	SLR Camera Body
Sensor type	Live MOS
Image stabilizer	No
Image sensor size	4/3 \
Supported aspect ratios	3:2, 4:3, 16:9
Maximum image resolution	3136 x 2352 pixels
Still image resolution(s)	- 3136 x 2352\\r - 2560 x 1020\\r - 2048 x 1536\\r - 3136 x 2080\\r - 2560 x 1712\\r - 2048 x 1360\\r - 3136 x 1760\\r - 1920 x 1080
Optical zoom	1.5 x
Focal length range	2.8 - 3.5 mm
Minimum aperture number	-
Maximum focal length (35mm film equiv)	50 mm
Minimum focal length (35mm film equiv)	14 mm
Focus	TTL
ISO sensitivity	100, 200, 400, 800, 1600, Auto
Light exposure modes	Auto, Manual
Light exposure correction	± 2EV (1/3EV step)
Fastest camera shutter speed	1/2000 s
Slowest camera shutter speed	60 s
Flash modes	Auto, Flash off, Red-eye reduction, Slow synchronization
External flash connector	Yes
Power source type	Battery
HD type	Not supported
Maximum video resolution	- pixels
Memory slots	1
Internal memory	- MB
Compatible memory cards	MMC, SD, SDHC
Display diagonal	2.5 \
USB version	2.0
White balance	Auto, Daylight, Flash, Halogen, Manual, Outdoor, Shade
Self-timer delay	2, 10 s
Languages support	CZE, DEU, ENG, ESP, FRE, HUN, ITA, JPN
Battery capacity	1500 mAh
Battery life (CIPA standard)	450 shots
Product color	Black, Silver
Storage temperature (T-T)	3136 x 2352 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	80 mm
Width	145.8 mm
Height	86.9 mm
Weight	530 g