EasyManuals Logo

Leica Digilux 3 Software Installation Guide

Leica Digilux 3
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Firmware Update Procedures (Overview)
STEP 1: Check the current version of firmware used by your camera.
STEP 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
STEP 3: Copy the firmware file onto an SD / SDHC card.
STEP 4: Install the firmware update.
IMPORTANT
Please do not turn off your camera, or do not remove the memory card while updating your camera's firmware.
DOING SO CAN CAUSE SERIOUS DAMAGE TO YOUR CAMERA.
If the camera malfunctions after the firmware updating, please contact your Leica dealer or your local Leica
distributor (for addresses, see camera Warranty Card).
Actual Procedure
STEP 1:
Confirming the current firmware version.
Leica recommends that you update the firmware in your
camera if either of the following conditions exists:
A: If the firmware version is not displayed on the LCD using
the following procedure.
B: If the firmware version indicated is older than the version
being offered.
The firmware updating is not necessary if the firmware version
on your camera is newer than listed on this service.
1. Attach a lens to the camera body and then insert an SD or
SDHC memory card.
2. Set the camera’s power switch
to ON.
3. Press the playback button
to set the camera to playback
mode.
4. Press the
button , while holding down the [FUNC.2]
button
.
The screen shows (
)
DIGILUX 3:1.0-----Camera body Firmware version
LENS:1.0------------Lens Firmware version
5. Set the power switch
to OFF, after checking this.
Leica Camera AG / Page 2 of 6 / As at June 2007

Other manuals for Leica Digilux 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leica Digilux 3 and is the answer not in the manual?

Leica Digilux 3 Specifications

General IconGeneral
Camera typeSLR Camera Body
Sensor typeLive MOS
Image stabilizerNo
Image sensor size4/3 \
Supported aspect ratios3:2, 4:3, 16:9
Maximum image resolution3136 x 2352 pixels
Still image resolution(s)- 3136 x 2352\\r - 2560 x 1020\\r - 2048 x 1536\\r - 3136 x 2080\\r - 2560 x 1712\\r - 2048 x 1360\\r - 3136 x 1760\\r - 1920 x 1080
Optical zoom1.5 x
Focal length range2.8 - 3.5 mm
Minimum aperture number-
Maximum focal length (35mm film equiv)50 mm
Minimum focal length (35mm film equiv)14 mm
FocusTTL
ISO sensitivity100, 200, 400, 800, 1600, Auto
Light exposure modesAuto, Manual
Light exposure correction± 2EV (1/3EV step)
Fastest camera shutter speed1/2000 s
Slowest camera shutter speed60 s
Flash modesAuto, Flash off, Red-eye reduction, Slow synchronization
External flash connectorYes
Power source typeBattery
HD typeNot supported
Maximum video resolution- pixels
Memory slots1
Internal memory- MB
Compatible memory cardsMMC, SD, SDHC
Display diagonal2.5 \
USB version2.0
White balanceAuto, Daylight, Flash, Halogen, Manual, Outdoor, Shade
Self-timer delay2, 10 s
Languages supportCZE, DEU, ENG, ESP, FRE, HUN, ITA, JPN
Battery capacity1500 mAh
Battery life (CIPA standard)450 shots
Product colorBlack, Silver
Storage temperature (T-T)3136 x 2352 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth80 mm
Width145.8 mm
Height86.9 mm
Weight530 g

Related product manuals