Leica Digilux 3 Software Installation Guide

3. Extract downloaded file
- Depending on your Macintosh setting the file may be extracted automatically.
- If your OS is older than Mac OS X 1.02, Please use Extract software, if your Macintosh OS is newer
than Mac OS X 1.03, double click the file, DL3_200.zip.
4. The extracted file DL3_200.bin should be 4.665.412 Bytes (approx. 4.45 MB), if the file size is not the
same, please download and double click the file again.
The file size can be checked by File in Finder, then see information.
STEP 3.
Copying the firmware file onto an SD / SDHC memory card. Preparing a memory
card with the extracted file from STEP 2 above.
Preparation of the card
• Use an SD / SDHC card formatted in the LEICA DIGILUX 3.
• 8 MB or more must be free on the memory card.
• For information on formatting the memory card, please refer to the relevant section in the camera’s
instructions.
Copying the downloaded file onto the card
1. Connect your LEICA DIGILUX 3 and your PC with the USB cord and set the camera to PC mode by
selecting the option in the menu.
Press the Menu button to enter USB mode.
Press the Up button and then press Menu again.
2. Copy the file into the Root directory* of the memory card.
3. When copying is finished, unplug the USB cable to release the PC from USB Mode (the Windows
Explorer will show below when copy process is completed; Windows XP and the screen may differ
depending on the setting).
4. Turn off the camera by pressing the power switch.
* Root directory = The first or top-most directory in the hierarchy.
Files can be copied directly from the PC by using SD / SDHC card reader/writer devices with the USB
port. Format the memory card with the LEICA DIGILUX 3 in such cases.
Note
When formatting the memory card, all data, including protected data, will be erased and can not be
recovered. Please make sure not to lose your important data, i.e. to save it to other storage devices such
as your PC’s hard disc.
Leica Camera AG / Page 4 of 6 / As at June 2007

Leica Digilux 3 Specifications

General

Camera type	SLR Camera Body
Sensor type	Live MOS
Image stabilizer	No
Image sensor size	4/3 \
Supported aspect ratios	3:2, 4:3, 16:9
Maximum image resolution	3136 x 2352 pixels
Still image resolution(s)	- 3136 x 2352\\r - 2560 x 1020\\r - 2048 x 1536\\r - 3136 x 2080\\r - 2560 x 1712\\r - 2048 x 1360\\r - 3136 x 1760\\r - 1920 x 1080
Optical zoom	1.5 x
Focal length range	2.8 - 3.5 mm
Minimum aperture number	-
Maximum focal length (35mm film equiv)	50 mm
Minimum focal length (35mm film equiv)	14 mm
Focus	TTL
ISO sensitivity	100, 200, 400, 800, 1600, Auto
Light exposure modes	Auto, Manual
Light exposure correction	± 2EV (1/3EV step)
Fastest camera shutter speed	1/2000 s
Slowest camera shutter speed	60 s
Flash modes	Auto, Flash off, Red-eye reduction, Slow synchronization
External flash connector	Yes
Power source type	Battery
HD type	Not supported
Maximum video resolution	- pixels
Memory slots	1
Internal memory	- MB
Compatible memory cards	MMC, SD, SDHC
Display diagonal	2.5 \
USB version	2.0
White balance	Auto, Daylight, Flash, Halogen, Manual, Outdoor, Shade
Self-timer delay	2, 10 s
Languages support	CZE, DEU, ENG, ESP, FRE, HUN, ITA, JPN
Battery capacity	1500 mAh
Battery life (CIPA standard)	450 shots
Product color	Black, Silver
Storage temperature (T-T)	3136 x 2352 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	80 mm
Width	145.8 mm
Height	86.9 mm
Weight	530 g