EasyManuals Logo

Leica GM30 User Manual

Leica GM30
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
GR30/GM30/GR50, Description of the System
24
2.5 Operation
Overview The instrument can be operated by:
Pressing its buttons
The web interface
Leica GNSS Spider software
With the Outside World Interface (OWI). Contact your local Leica Geosystems repre-
sentative for information on OWI documentation.
The instrument is delivered with default settings which cover the needs of the typical
use case. Use the web interface or Leica GNSS Spider to adjust the instrument
settings.
Operation by web
interface
The web interface is the main component used to configure and operate the instru-
ment.
Refer to the "GR/GM Series Operational Manual (Online Help)" for a detailed descrip-
tion of the web interface.
Supported operating systems for web interface setup over USB
Windows 7 (32 bit and 64 bit)
Windows 8 (32 bit and 64 bit)
Windows 10 (32 bit and 64 bit)
Supported web browsers for the web interface
All current versions of the following web browsers are supported and tested:
Internet Explorer
Firefox
Chrome
Other web browsers, such as Opera or Safari, can work but are not regularly tested
for compatibility.
The web interface is the primary interface between the user and the instru-
ment. To use the web interface correctly make sure that the web browser
allows JavaScript to be run. Check the web browser settings if you have prob-
lems using the web interface.
Web interface
security
When accessing the web interface for the first time, or after the settings have been
formatted, use the default User name (Admin) and Password (12345678) to log in.
For security reasons, it is recommended to create a new administrator
account when logging in for the first time. After creating the new adminis-
trator, log out and relogin with the new user credentials. The default user
account can then be deleted. Refer to the "GR/GM Series Operational
Manual (Online Help)" for a step-by-step guide.
A Personal Unblocking Key is a PIN unlock key. The pre-installed PUK user
has administrator rights and is based on the receiver's serial number. It can
be used to access the receiver in case all other user credentials have been
lost.
User name: PUK
Password: Your Personal Unblocking Key
Refer to the document accompanying the shipment of the
receiver. Contact your local Leica Geosystems representa-
tive in case this document has been lost.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leica GM30 and is the answer not in the manual?

Leica GM30 Specifications

General IconGeneral
TypeGNSS Receiver
Channels555
GPS L1/L2/L5Yes
GLONASS L1/L2Yes
Galileo E1/E5a/E5b/E6Yes
BeiDou B1/B2/B3Yes
QZSS L1/L2/L5Yes
SBASYes
Update RateUp to 20 Hz
Operating Temperature-40°C to +65°C
Ingress ProtectionIP67
Battery LifeUp to 10 hours
Position Accuracy (RTK)8 mm + 1 ppm (Horizontal), 15 mm + 1 ppm (Vertical)
Communication InterfacesBluetooth, Ethernet, USB

Related product manuals