CAMERA OPERATION ▸ CONTROL ELEMENTS
23
ISO SETTING DIAL
The sensitivity of the film used must be set to ensure a correct
exposure metering function. Choose a click value engraved on the
ISO setting dial. The film sensitivity settings are stated in ISO and
degrees. Choose a sensitivity between ISO 6/9° and ISO 6400/39°.
▸ Turn the ISO setting dial until the triangular index points to the
correct value.
• Opposite values indicate the same film sensitivity in ISO or in
degrees (DIN).
FILM ADVANCE LEVER
– Film transport to the next exposure
– Cocking the shutter release
To Next Page
