CAMERA OPERATION ▸ REPLACING THE FILM PACK
28
REMOVING THE FILM PACK
▸ Hold the camera with the base facing up
▸ Open the camera (see p. 26)
▸ Pull out the film pack
▸ Store the film pack in a cool and dark location
INSERTING THE FILM PACK
▸ Hold the camera with the base facing up
▸ Open the camera (see p. 26)
▸ Push the film pack approximately half-way into the recess in the
camera
▸ Grab the start of the film and pull it into the winding spool on the
other side of the camera
• The schematic illustration on the base of the camera shows the
correct end position.
▸ Use your fingertips to gently push the film pack and the start of
the film into the camera
▸ Close the camera
To Next Page
