Need help?Do you have a question about the Leica ScanStation P30 and is the answer not in the manual?
Instructions for safely unpacking and repacking the instrument.
Step-by-step guide for mounting and leveling the scanner on a tripod.
Procedure for precise instrument positioning using the laser plummet.
Overview of the instrument's front panel buttons and indicators.
Detailed explanation of elements and information displayed on the screen.
Interpretation of icons in the status bar for instrument status.
Step-by-step guide for powering the instrument on and off safely.
Guide to installing the app and enabling WiFi connection for remote control.
Overview of the advanced and standard user interface main menus.
Starting a scan project, defining stations, and selecting setup methods.
Overview of different methods for setting up the instrument station.
Configuring scan settings like Field of View, Resolution, and Image Control.
Setting parameters for fenced sub-scans for higher detail.
Defining and acquiring scan targets for accurate measurements.
Creating and configuring traverse projects and parameters.
Performing foresight and backsight measurements for traverse stations.
Displaying misclosure and coordinates for a closed traverse.
Managing projects, including creation, editing, and deletion.
Managing target definitions, including creation and editing.
Managing control points, including import and export.
Checking the status of internal/external batteries and memory usage.
Viewing instrument type, serial number, and firmware version.
Checking electronic level and laser plummet status and settings.
Checking and configuring internal WiFi connection parameters.
Setting linear units, decimal places, and temperature/pressure units.
Configuring the system's local date and time.
Configuring instrument behavior like calibration checks and fan cooling.
Selecting or deleting languages for the user interface.
Formatting the scanner's hard disc and transferring projects/files.
Entering or uploading firmware maintenance license keys.
Recalibrating the touch screen and checking instrument parameters.
Checking angular, range, and tilt parameters for instrument accuracy.
To Next Page
General
