What to do if my Leica Scanner shows a system warning?
If your Leica Scanner displays a system warning, such as indicating a full storage device or an empty battery, try shutting down the instrument and rebooting it. If the warning persists, check the internal storage capacity and the battery's power status. You may need to delete data or replace the battery to resolve the issue.
Why does my Leica BLK360 switch off automatically after being recharged?
If your Leica Scanner system switches off automatically when you turn it on or start a scan, even after a full recharge, the battery charger might be defective. Check the functionality of the battery charger, paying attention to the charging status displayed on it.
Why does my Leica Scanner keep switching off?
If your Leica Scanner system switches off automatically when you turn it on or start a scan, it could be due to a low battery. Try recharging or replacing the battery.
What to do if Leica Scanner switches off even after recharge?
If your Leica Scanner system switches off automatically when starting a scan, even after being fully recharged, the internal battery may no longer be charging. This typically happens at the end of its life, when it loses most of its capacity, and the battery needs to be replaced.
How to fix missing points in Leica BLK360 Scanner scan?
If you notice missing points in your Leica Scanner scans, it might be due to dust, debris, or fingerprints on the rotating mirror. Use glass cleaning tissue to clean the affected areas.
General| Measurement Range | 0.6 - 60 m |
|---|---|
| Scan Speed | 360, 000 points per second |
| Laser Class | Class 1 |
| Thermal Camera | No |
| Laser Wavelength | 830 nm |
| IP Rating | IP54 |
| Connectivity | USB-C, Wi-Fi |
| Type | Laser scanner |
| Accuracy | 4 mm at 10 m |
| Field of View | 360° horizontal, 300° vertical |
| Camera | 13 MP |
| Data Storage | Internal memory |
| Wireless Communication | Wi-Fi |
| Operating Temperature | 0°C to +40°C |
| Imaging | High dynamic range (HDR) spherical imaging |
| Weight | 1 kg |
Locating the model and serial number of your product on the type plate.
Listing available documentation and where to find it.
Provides an overview of safety directions for product users and warning messages.
Details intended use, misuse, and environmental operating limits.
Outlines stakeholder duties and highlights potential dangers during product operation.
Covers notices, cautions, and warnings about product handling and battery safety.
Warnings about battery influences, disposal, and lightning strike risks.
Warnings about repairs, electrical shock, and laser safety standards.
Details scanning laser specs and electromagnetic compatibility information.
Risks of electromagnetic radiation disturbing other equipment and precautions.
Risks of using the product with radio or digital cellular phone devices.
Illustrates and lists system components and items in the product packaging.
Identifies and labels the key physical components of the BLK360 instrument.
Explains the power button operation and how status is indicated by the ring-shaped LED.
Details LED status for operation and firmware update modes.
General guidelines and step-by-step instructions for setting up the instrument and tripod.
Instructions for surface setup and initial operation of the BLK360.
Guides for operating the BLK360 via Wi-Fi and USB connections.
Detailed steps for establishing Wi-Fi and USB-C connections.
Information on imaging capabilities, cameras, and ambient conditions.
Details FoV and environmental factors impacting scanning.
Provides solutions for common scanning and operational issues.
Visualizes scanning laser FoV and outlines data transfer methods.
Safety guidelines for batteries/chargers and details on the GKL825 multi-charger.
Identifies charger components and explains LED indicators.
Step-by-step guide for inserting and removing the internal battery.
Guidelines for maintaining, transporting, and storing the equipment.
Procedures for cleaning the product and its air inlet mesh.
Visual guide for cleaning the air inlet mesh using bellows or compressed air.
Instructions for cleaning critical optical surfaces of the instrument.
Provides overall specs, performance metrics, accuracy, and laser data.
Specific technical parameters of the scanning laser.
Estimated scan durations and image capture times.
Electrical specs, operating/storage temps, and protection ratings.
Physical dimensions of the BLK360 and related accessories in mm and inches.
Lists product weight and included accessories.
Displays regulatory labels and certifications for BLK360 and battery.
Details frequency bands, output power, and antenna for WLAN.
EU, USA, and Canada compliance statements and regulations.
Guidelines for transporting lithium batteries according to IATA regulations.
Details regarding open source software licenses and source code availability.
To Next Page
