Leica BLK360 User Manual

3 User Interface
3.1 Power Button
NEW ILLUSTRATION
013456_001
a
a Power button
Power button when the BLK360 is THEN
Press and hold the
button <0.5 sec.
off. The BLK360 switches on
and the LED starts blink-
ing yellow.
Press and hold the
button <0.5 sec.
on and ready. The LED is
continuous green.
The BLK360 starts
recording and the LED
starts blinking yellow.
Press and hold the
button >2 sec.
on and ready. The LED is
continuous green.
The LED starts blinking
yellow and the BLK360
switches off.
Press and hold the
button > 5 sec.
on. The BLK360 switches off
immediately. Hard shut-
down.
NOTICE
It is mandatory to follow always this procedure to shut down the instrument.
Do not remove the battery from a running instrument!
3.2 Instrument Status
The ring-shaped LED lights up green, yellow or red in different intervals to
show the operation states of the BLK360.
NEW ILLUSTRATION
c
c
b
b
b
a
a
a
a Ring-shaped LED continuous
b Ring-shaped LED blinking
c Ring-shaped LED alternating
Power button
Device status
User Interface 17

Leica BLK360 Specifications

General

Measurement Range	0.6 - 60 m
Scan Speed	360, 000 points per second
Laser Class	Class 1
Thermal Camera	No
Laser Wavelength	830 nm
IP Rating	IP54
Connectivity	USB-C, Wi-Fi
Type	Laser scanner
Accuracy	4 mm at 10 m
Field of View	360° horizontal, 300° vertical
Camera	13 MP
Data Storage	Internal memory
Wireless Communication	Wi-Fi
Operating Temperature	0°C to +40°C
Imaging	High dynamic range (HDR) spherical imaging
Weight	1 kg