Leica WILD M695 User Manual

Name: Leica WILD M695
Brand: Leica
Rating: 5 (1 reviews)

116 pages

To Next Page

Leica AG, CH-9435 Heerbrugg (Switzerland)

Telephone +11 (071) 70 31 31, Fax +41 (071) 72 69 52

Leica is a registered trade mark of Leica technologij B. V. Rijswijk, the Netherlands

Contents2
Faulty Product Has to be Exchanged9
Wiring Diagram14
M695 Fault Finding18
Connecting the Testbox19
Settings on the Control Unit20
Power Supply of Control Unit21
Functions of Hand- or Footswitch22
Supply of Microscope23
Check Lines of Powerground PGND24
Lamp Control25
Zoom Control26
Focus Control27
Description of Functions MEL64/65 Control Unit29
Power Supply MEL64/6532
Control-Leds35
24V Supply35
Limitation of Excess Current35
10V Supply35
Lamp Control MEL64/6538
Panel Board Receiver Swing Arm Board39
Zoom Control MEL64/6540
Panel Board41
Receiver Board Swing Arm42
Control Leds43
Using the Motor to Set the Zoom Position43
Presetting the Zoom Displacement Speed43
Focus Control MEL 64/6544
Presetting the Focusing Displacement Speed47
Motorized Focusing47
Travelling to MID-Position48
List of Signals for Swingarm MSV136/13750
List of Signals for Swingarm MSV 136/13751
Microscope Control53
Description of Functions M695 Microscope55
Power Supply56
- Recognizing End of Range67
- Travelling to the MID-Position67
- Reference to Connectors68
- Reference to Boards70
- Control Unit MEL61/62 - Connector Panel71
- Control mit MEL64/65 - Connector Panel72
- Control Unit MEL61/62 and MEL64/65 - Rear Section73
- Control Unit MEL61/62 and MEL64/65 - Front Section74
- Swing Arm Cable - Connector to Control Unit75
- Swing Arm Cable - Connector to Microscope M69576
- Microscope M695 - View to U-Carrier77
- Microscope M680 - View to Zoom Servo78
- Microscope M695 - View Motorized Focusing (MOB)79
- Replace X-Y Slide82
- Replace Gas Spring of Swingarm MSV136/13783
- Replacing Swingarm Cable86
- Focus Servo Board for Motorized Focusing89
- M695 Optics Carrier90
- Replace Lamp-Control Board90
- Control Unit MEL64/6591
- Replacing Panel Board91
- Replacing Receiver Board92
- Replacing Display Board92
- Inspection Procedure93
- Test Plan for M695 Surgical Microscope94
- Inspecting the Hand-/Footswitch Functions and Function Display94
- Activate the Foot- or Handswitch Functions95
- Connect Cables of Microscope and Swingarm95
- Cleanliness of Optical Components99
- Rotation99
- Tiltable Joint/Swingarm99
- Optics99
- Test Report for M695101
- M695 Service Courses102
- Training102
- Test Set M695/M680 - Stock No. 566 152103
- Functions of Test Box104
- Spare Parts List M695113
- Spare Parts Catalogue113
- Special Tools115

Leica WILD M695 User Manual

Table of Contents

Questions and Answers:

Leica WILD M695 Specifications

Related product manuals

Brand	Leica
Model	WILD M695
Category	Microscope
Language	English