Need help?Do you have a question about the Leica DM750 P and is the answer not in the manual?
General| Category | Microscope |
|---|---|
| Focusing | Coaxial coarse and fine focusing |
| Illumination | LED |
| Eyepieces | 10x/20 mm |
| Power Supply | 100-240 V, 50/60 Hz |
| Objective Lenses | 4x, 10x, 40x, 100x |
| Optical System | Infinity optical system |
Describes special functions and important instructions for operational safety, maintenance, and accessories.
Explains warning symbols and provides important information for safe operation and handling of the instrument.
Provides critical notes on safe installation, operation, and maintenance, including third-party accessories and legal requirements.
Details on proper usage, place of use, non-intended use, and potential hazards during operation.
Highlights health risks associated with microscope use and specific dangers during operation, including eye safety.
Outlines responsibilities for ensuring safe operation, maintenance, and user training for the microscope.
Provides guidelines for cleaning and maintaining the microscope, including specific instructions for optical surfaces and parts.
Details on approved accessories, maintenance-free nature, service agreements, and repair procedures.
Specifies electrical input, fuse replacement, and environmental operating and storage conditions.
Welcome and overview of the Leica DM750 P Polarizing Microscope System for educational and industrial applications.
Instructions for carefully removing the microscope and components from packaging and checking contents.
Step-by-step guide on how to attach the Analyzer Module or Analyzer/Bertrand Lens Module to the microscope stand.
Instructions on how to install and adjust the polarizing viewing tube and eyepieces for optimal viewing.
Guide on how to attach objectives to the nosepiece, starting with the lowest magnification.
Procedure for installing the substage condenser, including adjusting its mount and positioning the polarizer.
Guides on connecting power, setting illumination control, and turning on the microscope for initial use.
Instructions on how to adjust the condenser's iris diaphragm to match the objective's numerical aperture.
Steps for positioning the polarizer to the zero position for polarized light microscopy.
Procedure for placing a specimen, coarse/fine focusing, and adjusting illumination for sharp image viewing.
Guide on adjusting eyetubes for interpupillary distance and focusing for clear binocular vision.
Steps for setting up Koehler illumination by adjusting the field diaphragm and condenser.
Procedure for centering objectives using centering keys for accurate specimen observation.
Instructions on using the Bertrand Lens for conoscopic viewing and focusing the image.
Information on the automatic illumination shutoff feature and how to change its status.
Concluding remarks on changing objectives and diaphragms for optimal viewing and enjoying the results.
Guidelines for proper handling, covering, cord management, and cleaning of optical components.
To Next Page
