Need help?Do you have a question about the Leica DMIRE2 and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | DMIRE2 |
| Category | Microscope |
| Language | English |
Details halogen lamp intensity adjustment wheel and coaxial coarse & fine focus controls.
Covers illumination/field diaphragms, objective prism turret, and filter cube turret.
Alpha-numeric display shows objective position, step size, limits, objective settings, filter cube, and mode.
Buttons for learn mode, voltage/objective readout, and setting focus limits/step size.
LED panel indicates active fluorescence filter cube status and associated fluorochromes.
Two-way switches to rotate the filter cube turret; active cube is illuminated red.
One-way switch; red LED indicates shutter is closed.
Two-way switch directs light to eyepieces, scanner, or disables output.
Adjust halogen lamp brightness using the wheel on the front left.
Switch off transmitted light, switch on mercury lamp, cycle cubes via switches.
Details objective types, magnification, NA, immersion, cover-glass, DIC prisms, and pixel size.
Use control panel buttons to switch immersion modes; use turret buttons to change objectives.
Knobs on left/right side for up/down focusing.
Buttons on right side for up/down focusing, respecting set limits.
Start software, use camera icon, adjust exposure, and snap images.
To Next Page
