Need help?Do you have a question about the Leica DMI Series and is the answer not in the manual?
General| Microscope Type | Inverted Microscope |
|---|---|
| Objectives | Achromatic, Plan Achromatic |
| Optical System | Infinity Optical System |
| Illumination | LED or halogen transmitted light |
| Contrast Methods | Brightfield, Phase Contrast, DIC, Fluorescence |
| Observation Tubes | Binocular, Trinocular |
| Focusing | Coarse and Fine focusing |
| Stage | Motorized stage |
| Camera Port | Integrated camera port for digital imaging |
| Condenser | Various condensers available for different contrast methods (e.g., Brightfield condenser, Phase contrast condenser, DIC condenser) |
| Imaging | Digital imaging capabilities when used with a compatible microscope camera and software |
Explains the various text symbols and pictograms used throughout the manual.
Provides general safety guidelines, compliance standards, and warnings for instrument operation.
Details electrical specifications and safety precautions for microscope components and accessories.
Instructions for safe transport and storage conditions, including temperature and humidity limits.
Safety precautions for handling light sources, addressing irradiation risks and proper operation.
Information regarding the unsuitability for laser coupling and alternative options.
Safety advice for handling immersion oil, emphasizing skin contact avoidance and data sheets.
Emphasizes caution when handling acids and aggressive chemicals to prevent contact.
Guidelines on proper disposal of the product according to national and EU regulations.
Illustrates and describes the type labels found on the DMI3000B, DMI4000B, and DMI6000B models.
Details the various contrast methods supported by the DMI Series microscopes.
Describes the features and capabilities of the transmitted light illumination arm.
Outlines the features of the incident light axis for different DMI models.
Describes the design and adjustment features of the microscope tubes.
Details the manual and motorized magnification changer options.
Describes the motorized and manual objective turrets for different DMI models.
Lists various types of specimen stages available for the DMI Series.
Details the features of condensers for DMI4000 B and DMI6000 B, including housings and heads.
Describes the motorized and manual Z focus systems for different DMI models.
Lists and describes the available observation ports for DMI6000 B and DMI4000 B.
Details the control buttons, hand wheels, and remote modules available for DMI series.
Explains the function of the electronics boxes and their connections.
Lists the available interface ports like USB and RS232 for data communication.
Mentions the Leica Application Suite (LAS) for microscope and camera control.
Specifies requirements for the installation environment and ambient conditions for optimal operation.
Details components to disassemble for safe transportation and packaging to prevent vibration damage.
States the approximate weight of the fully equipped microscope for handling purposes.
Lists the tools required for assembling the microscope, often provided with the unit.
Step-by-step guide for installing the transmitted light illumination carrier onto the microscope.
Instructions for installing the DIC module and objective prisms, including prism disk replacement.
Describes the various types of specimen stages and their installation procedures.
Details the installation of condensers, light rings, and slit diaphragms into the condenser disk.
Instructions for inserting eyepieces into the eyepiece tubes and adjusting for correct magnification.
Guidance on installing objectives into the objective turret and checking parfocality.
How to install and change filters in the illumination arm's filter magazine.
Steps to mount and connect the transmitted light lamp housing to the microscope.
Procedures for changing halogen lamps in the 107 or 107/2 lamp housings safely.
Instructions for mounting the lamp housing or mirror housing onto the rear wall of the stand.
Safety precautions and procedures for installing incident light lamps, including cooling time.
Guide on how to equip the incident light turret disk with filter cubes for fluorescence.
Instructions for inserting the front module slider for integrated contrast methods.
Steps for installing the polarizer and analyzer components for polarization contrast.
Information on connecting cameras and other optional accessories to the microscope.
Details on connecting the microscope to various CTR electronics boxes via specific ports.
How to connect the microscope to a computer using serial or USB cables.
Instructions for connecting the electronics box and external supply units to AC power.
Explains the intelligent automation and control elements of the DMI4000 B and DMI6000 B.
Step-by-step guide for powering on the microscope and its components correctly.
Describes the microscope's current settings display and its areas/lines.
Explains the fixed and variable function buttons on the microscope stand for operation.
Details the functions of buttons located on the front control panel of the microscope.
Explains the functions of the SmartMove remote control module for stage and focus control.
Guides on setting up transmitted light illumination, including Koehler illumination preparation.
How to check and center phase contrast rings for different objectives.
Verifies the positioning and seating of slit diaphragms for modulation contrast.
Instructions for setting the motorized polarizer to achieve optimal darkening.
Procedures for adjusting transmitted and incident light sources for optimal illumination.
Guide for powering on the microscope and its components correctly.
Overview of contrast methods available on DMI4000B/DMI6000B and DMI3000B.
Steps for setting up bright field transmitted light illumination.
Instructions for setting up phase contrast transmitted light illumination.
Procedures for dark field transmitted light illumination setup.
Guide for setting up transmitted light polarization contrast method.
Steps for setting up transmitted light Differential Interference Contrast (DIC).
Instructions for integrated phase contrast transmitted light setup.
Guide for setting up integrated modulation contrast transmitted light.
Procedures for operating the fluorescence module and changing filter cubes.
Details how to use combination methods like FLUO/PH and FLUO/DIC.
Explains how to focus the image and set focus stops using various controls.
Information on adjusting viewing distance, angle, and beam splitting in photo tubes.
How to select active ports (VIS, Left, eyepieces) on different DMI models.
Instructions for using eyepieces, including reticle focus and vision correction.
Guidance on changing objectives and automatic settings selected by the microscope.
How to control stage movement, set increments, and store positions.
Details manual and motorized magnification changers and how to use them.
How to adjust light intensity for transmitted and fluorescence illumination.
Instructions for adjusting aperture and field diaphragms on DMI models.
Troubleshooting common problems related to the microscope stand not responding.
Troubleshooting issues with the microscope illumination system.
Solutions for problems in bright field mode, like focus or illumination issues.
Troubleshooting steps for dark field contrast issues.
Solutions for problems preventing phase contrast observation.
Troubleshooting steps for polarization contrast issues.
Solutions for issues with transmitted light interference contrast.
Troubleshooting fluorescence imaging problems like dark or weak images.
Addresses troubleshooting for 'Init Error' messages on the LeicaScreen.
Guidance on using the dust cover to protect the microscope from dust after use.
Procedures for cleaning coated parts, the microscope stage, and optics.
Instructions for cleaning glass surfaces and microscope objectives.
Steps for safely removing immersion oil from components using cloths and alcohol.
Safety precautions for handling acids and aggressive chemicals.
Information on the physical space requirements for the microscope setup.
Details the purpose and use of the height compensation plate for adjusting viewing height.
To Next Page
