EasyManua.ls Logo

Leica DMi8 A User Manual

Leica DMi8 A
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Manual
Leica Microsystems CMS GmbH Manual 11934095, Revision 1.0 from 2015-01-15
Leica DMi8 A
Leica DMi8 C
Leica DMi8 M
Question and Answer IconNeed help?

Do you have a question about the Leica DMi8 A and is the answer not in the manual?

Leica DMi8 A Specifications

General IconGeneral
BrandLeica
ModelDMi8 A
CategoryMicroscope
LanguageEnglish

Summary

Important Notes about this Manual

Text symbols and their meanings

Explains text symbols and their meanings used in the manual for clarity and safety.

Safety Notes

General safety notes

Provides essential general safety guidelines and precautions for operating the microscope.

Technical data

Lists the crucial technical specifications and electrical data for the microscope system.

Overview of Components

Unpacking

Installation location

Details the recommended environmental and site conditions for proper microscope installation.

Assembling the Microscope

Assembling the DIC Module and DIC objective prisms

Instructions for installing the Differential Interference Contrast (DIC) module and objective prisms.

Assembling the specimen stage

Guidance on attaching and securing the microscope's specimen stage.

Inserting the eyepieces

Step-by-step procedure for properly inserting eyepieces into the microscope tubes.

Inserting the objectives

Procedure for screwing the microscope objectives into the objective turret.

Assembling the incident light illuminator

Instructions for mounting the incident light illuminator system onto the microscope.

Assembling the transmitted light illuminator arm (TL)

Steps for attaching the transmitted light illuminator arm to the microscope.

Fixed transmitted light illuminator arm

Specific instructions for assembling the fixed transmitted light illuminator arm configuration.

Assembling the condensers for the tiltable transmitted light illuminator arm

Guidance on assembling condensers for microscopes with a tiltable illuminator arm.

Assembling the transmitted light lamp housing

Steps for installing and connecting the transmitted light lamp housing.

Wiring

Details on connecting all necessary cables and power for the microscope system.

Startup

Adjusting the diaphragms for the incident light illuminator

Procedure for setting the field and aperture diaphragms for optimal incident light illumination.

Inspecting the phase contrast ring

Guide to checking and centering phase contrast rings for correct phase imaging.

Setting the polarizer

Instructions on how to correctly position and set the polarizer for optimal extinction.

Condenser centering

Steps to center the condenser for proper Koehler illumination and image quality.

Related product manuals