Need help?Do you have a question about the Leica M205 A and is the answer not in the manual?
General| Type | Stereo Microscope |
|---|---|
| Magnification | 7.8x - 160x |
| Zoom Range | 20.5:1 |
| Numerical Aperture (Max) | 0.35 |
| Optical System | FusionOptics |
| Light Source | LED |
| Objective | 1.0x Plan Apo |
| Illumination | LED illumination |
| Eyepieces | 10x |
| Camera Compatibility | Leica DFC cameras |
Booklet included with instrument contains additional information about handling and care.
The Leica M series can be used in clean rooms without any problems.
Guidelines on suitable cleaning agents, chemicals, and techniques for cleaning.
Repairs must be carried out by Leica Microsystems-trained technicians using original spare parts.
Ensure the microscope is operated, maintained, and repaired by authorized personnel.
Refer to the "Safety Concept" booklet for intended use information.
Refer to the "Safety Concept" booklet for non-intended use information.
Guidelines for placing electrical components, avoiding temperature fluctuations, and managing humidity.
Ensure proper operation, maintenance, and repair by trained personnel.
Refer to "Safety Concept" booklet; use original spare parts; switch off power before opening.
Use original packaging; disassemble moving parts for transport.
Risks include eye strain and musculoskeletal problems; proper workplace setup and training are recommended.
Protective measures against UV radiation, including screens, filters, and avoiding reflective backgrounds.
Always unplug the supply unit before installation, disassembly, or maintenance.
Never open the lamp housing when switched on; allow to cool before opening; do not cover air duct.
Follow manufacturer instructions; handle lamp breaks carefully; replace discolored lamps promptly.
Step-by-step instructions for connecting the focusing column to the microscope base.
Instructions for placing and securing the optics carrier onto the focusing column.
Steps for assembling intermediate tubes between the optics carrier and the binocular tube.
Guide on inserting eyepieces into the tubes, ensuring proper fit and tightening.
Instructions on how to attach an objective to the optics carrier, with safety notes.
Detailed steps for removing transport anchors and attaching the objective nosepiece.
Procedure for adjusting parfocality once for both objectives, ensuring focus remains.
Steps to check and adjust the switch position on the AX carrier before installation.
Instructions for installing the prepared AX carrier onto the focusing column and attaching the optics carrier.
Mounting the cross-stage to the base, including left/right control attachment.
Instructions for attaching controls on the left or right side of the cross-stage.
Steps for attaching the axis with control buttons and the cover rail.
Steps for placing and securing the cross-stage onto the base.
Steps for assembling the focusing drive and column onto the base.
Instructions for placing and securing the motorized cross-stage onto the base.
Connecting the cross-stage motor, PSC controller, and PC.
Encourages studying the Quick Start Guide for essential steps and practical information.
Identifies key components of the M series microscope with numbered labels.
Explains how to adjust the interpupillary distance to achieve a single circular image field.
Guide on using eyepieces with and without glasses, including dioptric correction.
Explains the focusing mechanism, coarse/fine adjustment, and their resolution.
Steps to adjust the resistance of the focus drive knobs for desired movement.
Instructions on how to change magnification using the integrated zoom rotary knob.
How to enable/disable ratchet steps for continuous or step-wise zoom operation.
Explains parfocality, allowing focus to be maintained across magnifications.
Describes the function of the iris diaphragm in controlling light and depth of field.
Lists available eyepieces with their magnification, dioptric correction, and order numbers.
Discusses potential sources of infection from eyepieces and how to minimize risk.
Details how to use the built-in dioptric correction for users with vision problems.
Instructions to adjust dioptric correction and parfocality for optimal viewing.
Instructions on fitting and aligning graticules in eyepieces for measurements and numbering.
Explains the Leica Application Suite (LAS) for image capture, control, measurement, and evaluation.
Details the application of C-mount interfaces and adapters for connecting cameras.
Describes the 50% video/phototube for simultaneous viewing and photography.
Explains the 100% video/phototube for exclusive viewing or photography.
Details the microscope carrier AX for photography, measurement, and polarization.
Explains the function and technical constraints of the objective nosepiece.
Describes various types of objectives (Achromatic, Planachromatic, Apochromatic) and their suitability.
Identifies and labels the controls and components of the TL ST transmitted-light base.
Instructions for operating the TL ST base, including light intensity and transmitted-light control.
Detailed steps for replacing the halogen lamp on the TL ST base, including safety precautions.
Identifies and labels the controls and components of the TL BFDF transmitted-light base.
Instructions for operating the TL BFDF base, including bright field and dark field illumination.
Identifies and labels the controls and components for the Leica TL RC and TL RCI bases.
Explains the function and operation of the deflection mirror in the TL RCI base.
Details the potentiometers for controlling color intensity and temperature on the TL RCI base.
Describes how to set relief contrast using switches and the deflection mirror.
Explains different transmitted light methods like bright-field, inclined, and dark-field.
Instructions for creating positive and negative relief images using the deflection mirror.
Instructions for installing filters into the filter holder of TL RC and TL RCI bases.
Explains how to operate the non-motorized IsoPro cross-stage using its control knobs.
Details the controls for the motorized IsoPro stage, including the DCI module and PSC controller.
Describes the functionality and programmability of hand wheels and foot switches.
Explains the Leica SmartTouch touchscreen controller for managing experiment procedures.
Details the Leica PSC controller for precise operation of the IsoPro motorized cross-stage.
Provides dimensional drawings for Leica M125 C and M165 C with incident light base.
Provides dimensional drawings for Leica M205 C with TL ST base and manual focus.
Provides dimensional drawings for the Leica LED5000 MCI illuminator.
Provides dimensional drawings for the Leica LED5000 RL illuminator.
Provides dimensional drawings for the Leica LED5000 NVI illuminator.
Detailed specifications for the Leica TL ST transmitted-light base.
Detailed specifications for the Leica TL BFDF transmitted-light base.
Detailed specifications for the Leica TL RC and TL RCI bases.
Detailed specifications for the Leica IsoPro Motorized XY Stage.
Provides formulas and examples for calculating total magnification and field of view.
Guidelines for microscope care, maintenance, and contact information for support.
To Next Page
