Need help?Do you have a question about the Leica M205 C and is the answer not in the manual?
General| Type | Stereo Microscope |
|---|---|
| Zoom Range | 20.5:1 |
| Illumination | LED |
| Camera Port | C-mount |
| Field of View | 29.5 mm |
| Working Distance | 61 mm (with 1x objective) |
Information about handling and care.
Guidelines for using the microscope in clean environments.
Instructions on proper cleaning agents and methods for the microscope.
Information on authorized repairs and use of genuine spare parts.
Details on available user manuals and CD-ROM for the Leica M series.
Explanation of danger, hot surface, and important information symbols.
Guidance on proper and improper usage of the Leica M series.
Recommendations for optimal and safe placement of the microscope.
Defines duties for safe operation, maintenance, and repair.
Information on potential health risks and ergonomic considerations for users.
Safety regulations for light sources and protection against UV radiation.
Instructions for safe handling and replacement of mercury lamps.
A welcoming message and overview of the Leica M series.
Discusses optical advancements and performance improvements in the M series.
Explains the benefits of electrical contacts for data transfer and power.
Highlights the flexible, modular design for user-specific configurations.
Details compatibility with previous series for objectives and tubes.
Guidance on proceeding with setup or skipping to the Quick Start Guide.
Steps for connecting the focusing column to the base.
Instructions for mounting the optics carrier onto the focusing column.
Procedure for fitting intermediate tubes between optics carrier and binocular tube.
Instructions for inserting and securing eyepieces.
Steps for attaching an objective to the optics carrier.
Guide to assembling the objective nosepiece.
Procedure for adjusting objective parfocality.
Steps to prepare the AX carrier for optics carrier use.
Instructions for installing the AX carrier.
Guide to unpacking and assembling the TL ST base.
Steps for assembling the standard stage onto the TL BFDF base.
Guide for assembling a standard stage onto the TL RC/RCI base.
Instructions for assembling the manual cross-stage.
Steps for installing the motorized cross-stage.
Description of terminals for connecting equipment and PC.
Instructions for routing cables using the integrated cable duct.
Visual representation of cable connections for the system.
Instructions for installing the LED5000 MCI illuminator.
Procedure for directly fastening the MCI illuminator to the column.
Guide for installing the LED5000 RL ring illuminator.
How to install accessories like polarization sets for the RL illuminator.
Instructions for operating the LED5000 RL ring illuminator.
Steps for attaching the LED5000 NVI to specific microscope models.
How to install optional accessories like the polarization set for the NVI.
Identifies key components of the M series microscope.
Guide to setting the correct interpupillary distance for clear viewing.
Instructions on how to use eyepieces, including for spectacle wearers.
Explanation of coarse and fine focusing mechanisms.
Guide to using the zoom knob for magnification adjustment.
Explains the concept and benefits of parfocal matching.
How to use the iris diaphragm to control light and depth of field.
Lists available eyepieces with their magnification and order numbers.
Important health considerations related to eyepiece usage and hygiene.
Guide to adjusting dioptric correction for users with vision problems.
How to combine dioptric correction with parfocality.
Instructions on fitting and using graticules for measurements.
Information on using Leica digital cameras and the Leica Application Suite.
Details on adapters for connecting cameras and compatible camera models.
Usage and assembly of the 50% trinocular tube for simultaneous viewing/photography.
Usage and assembly of the 100% trinocular tube for selective viewing or photography.
Instructions for using the AX carrier for stereoscopic viewing and photography.
How to use and technical constraints of the objective nosepiece.
Overview of achromatic, planachromatic, and apochromatic objectives.
Identifies controls and connections on the TL ST base.
How to operate the TL ST base, including illumination types.
Procedure for replacing the halogen lamp in the TL ST base.
Identifies controls and connections on the TL BFDF base.
How to operate the TL BFDF base, including bright/dark field illumination.
Identifies controls and connections for TL RC/RCI bases.
Details on the function and adjustment of the deflection mirror.
How to control color intensity and temperature on the TL RCI.
How to operate the TL RC/RCI bases for relief contrast.
Explains different transmitted light methods like bright-field and dark-field.
How to achieve positive and negative relief images using the TL RCI.
Instructions for inserting filters into the transmitted-light bases.
How to operate the non-motorized IsoPro cross-stage.
How to operate the motorized IsoPro XY stage.
Information on configuring and using hand wheels and foot switches.
Overview of controlling the microscope with the SmartTouch interface.
How to use the PSC controller for precise stage movement.
Displays dimensional drawings for M125 C and M165 C models.
Displays dimensional drawings for the M205 C model.
Displays dimensional drawings for the LED5000 MCI accessory.
Displays dimensional drawings for the LED5000 RL accessory.
Displays dimensional drawings for the LED5000 NVI accessory.
Formulas for calculating total magnification and field of view.
Guidelines for microscope care, maintenance, and contact information.
To Next Page
