Need help?Do you have a question about the Leica DM750 M and is the answer not in the manual?
General| Category | Microscope |
|---|---|
| Illumination | LED |
| Nosepiece | Quadruple nosepiece |
| Objective Lenses | 4x, 10x, 40x |
| Stage | Mechanical stage |
| Focus | Coaxial coarse and fine focus |
| Eyepieces | 10x |
| Condenser | Abbe Condenser |
| Power Supply | External power supply |
| Magnification Range | 40x to 1000x |
Explains user manuals and safety instructions for safe operation of Leica DM microscopy series.
Details warning symbols, danger symbols, and important information indicators used in the manual.
Provides general precautions, user manual details, and third-party supplier guidelines for safe use.
Covers proper usage, place of use, and non-intended use to ensure safety and prevent damage.
Discusses potential health risks and operational dangers, including eye strain and electrical hazards.
Outlines responsibilities for safe operation, qualified personnel, and proper maintenance of the instrument.
Provides general instructions and methods for cleaning coated parts, plastic parts, and glass surfaces.
Details approved accessories, maintenance recommendations, and guidelines for repairs and service work.
Lists electrical specifications, fuse replacement, and environmental operating conditions for the microscope.
Step-by-step guide on how to attach the incident light axis to the microscope's tripod mount.
Instructions for attaching different types of viewing tubes to the microscope stand using setscrews.
Specific instructions for installing and rotating the Leica EZ viewing tube with integrated eyepieces.
Instructions for inserting and securing eyepieces into the standard viewing tube.
Guidance on using eyeguards for eyeglass wearers and for blocking ambient light.
Provides instructions on how to properly screw objectives into the objective nosepiece using the knurled ring.
Steps to convert the microscope for incident light polarization by inserting polarizer and analyzer.
Details the process of connecting and switching on the microscope's illumination and adjusting brightness.
Explains how to open or close the aperture diaphragm to adjust resolution and depth of field.
Describes how to adjust incident light illumination modes and switch between bright-field and oblique illumination.
Explains the automatic shutoff feature and how to activate or deactivate delayed shutoff for the illumination.
Instructions on how to insert and position specimens using different types of specimen holders.
Introduces the two types of condensers available for transmitted illumination.
Step-by-step guide on how to install the condenser into the microscope's open holder.
Detailed procedure for precisely centering the condenser for optimal illumination.
Explains how to adjust the iris diaphragm of the condenser to match the objective's numerical aperture.
Instructions on positioning the specimen slide correctly under the objective using slide grips.
Describes the process of bringing the specimen into focus using coarse and fine focusing knobs.
Guides on adjusting the eyetubes for interpupillary distance and setting focusing eyepieces.
Steps to adapt and center the Koehler field diaphragm for optimal illumination.
Provides general handling instructions, cleaning methods for optical surfaces, and dust protection.
To Next Page
