Leica DMI Series User Manual

5
Contents
Contents
1. Important Notes about this Manual ............7
1.1 Text symbols, pictograms and
their meanings .................................................7
2. Intended Purpose of the Microscope ......... 9
3. Safety Notes ..................................................10
3.1 General Safety Notes....................................10
3.2 Electrical Safety.............................................11
3.3 Transport and storage ..................................13
3.4 Safety Instructions
for Handling the Light Sources ...................13
3.5 Notes on handling laser devices ................13
3.6 Notes on handling immersion oil ................13
3.7 Safety Instructions
for Handling Acids and Bases .....................14
3.8 Disposal...........................................................14
3.9 Type labels ......................................................14
4. Overview of the Leica DMI Series ............15
5. Unpacking the Microscope .......................28
6. Assembling the Microscope ......................31
6.1 Assembly Tools ..............................................31
6.2 Installation of the Transmitted Light
Illumination Carrier (TL) ................................32
6.3 Installation of the DIC Module ...................33
and DIC Objective Prisms.............................33
6.4 Installation of Specimen Stages .................34
6.5 Installation of Condensers ...........................39
6.6 Installation of Eyepieces ..............................44
6.7 Installation of Objectives..............................44
6.8 Installation of Filters
in the Illumination Arm..................................45
6.9 Installing the transmitted Light Lamp
Housing ...........................................................45
6.10 Installation and Replacement of the
transmitted Light Lamps:
107 or 107/2 Lamp Housing...........................46
6.11 Installing the Lamp Housing Mount and
Mirror Housing (Leica DMI4000 B and
DMI6000 B) .....................................................47
6.12 Installation and Replacement
of Incident Light Lamps ................................49
6.13 Equipping the Incident Light Turret Disk ....53
6.14 Inserting the Front Module Slider ...............56
6.15 Installation of the Polarizer
and Analyzer...................................................56
6.16 Optional Accessories....................................58
6.17 Connection to the Electronics Box CTR4000,
CTR5000, CTR5500, CTR6000, CTR6500,
CTR7000, CTR6500 HS, CTR7000 HS ............59
6.18 Connection to the Computer ........................60
6.19 Connection to the Power Supply ................60
7. Start-up ..........................................................61
7.1 Functional Principle (Leica DMI4000 B
and Leica DMI6000 B) ...................................61
7.2 Switching on the Microscope .....................65
7.3 The LeicaDisplay
(Leica DMI4000 B and DMI6000 B) .............66
7.4 The Function Buttons on the Stand ............67
7.5 The SmartMove Remote Control Module ..70
7.6 Illumination .....................................................70
7.6.1 Transmitted light ................................70
7.6.2 Incident Light - Fluorescence .........73
7.7 Checking Phase Contrast Rings ..................74
7.8 Checking modulation contrast slit
diaphragms .....................................................78
7.9 Setting the Motorized Polarizer ..................78
7.10 Adjusting the Light Sources ........................79

Leica DMI Series Specifications

General

Brand	Leica
Model	DMI Series
Category	Microscope
Language	English