159
Flash modes
Flash switched on and o by extending/retracting the unit,
automatic flash activation with and without pre-flash, manual flash activa-
tion with and without pre-flash, automatic flash activation with slower shutter
speeds with and without pre-flash, studio mode for triggering slave equipped
external ash systems.
Flash exposure compensation
±3EV in
1
/
3
EV increments.
Working range of the built-in flash unit
(for ISO 100/21°) approx.
0.3-2.0m/1-6 ft., guide number 5.
Recycling time of built-in flash unit
approx. 5s with fully loaded
battery.
Monitor
2,7“ TFT LCD with 230,000 pixels.
Displays
see p. 90
Self-timer
Delay optionally 2 or 12s.
Connections
5-pin mini USB socket 2.0 high-speed for quick data transfer
to the computer, HDMI socket for digital direct connection to corresponding
equipment, proprietary socket for external electronic viewnder Leica EVF 2
1
.
Power supply
Lithium ion battery, 3.7V, 1600mAh, capacity (according to
CIPA standards): approx. 450 images, charging time (from full discharge): ap-
prox 200 min.
Mains/charging unit
Input: Alternating current 100-240 V, 50/60Hz,
automatically switched.
Housing
Housing in Leica Design made of solid, ultra-light magnesium. Two
eyelets for carrying strap. ISO flash shoe with central and control contacts for
connection of external, more powerful ash units, e.g. Leica SF 24D and the
external electronic viewnder Leica EVF 2
1
.
Tripod thread
A
1
/
4
DIN 4503 (
1
/
4
“).
Dimensions
(WxHxD) approx. 124 x 69 x 51.5 mm /
4
7
/
8
x 2
11
/
32
x 2
1
/
32
inches
Weight
approx. 307/345g / 10.83/12.17oz (with/without battery)
1
Available as accessory; see also p. 152
2
According to CIPA DC-004 Standard
Construction and design subject to change.
To Next Page
Loading...
