Leitner ARIA - User Manual

Table of contents:
About this manual……………………………………..…1
Guide to safe operation………………………….…2-3
Checklist before each ride…………………………...3
Safeguarding guidelines……………………………….4
Maintenance schedule…………………………………4
Before your first ride…………………………………...5
Operation of your electric bike…………………….6
Getting started…………………………………………….7
Assembly and adjustment of…
• Folding frame……………………………………….…7
• Quick release levers………………………………..8
• Handle-bar and Stem…………………………..8-9
• front light……………………………………………….9
• Bell………………………………………………………...9
• Reflectors……………………………………………….9
• Seat, battery and seatpost…………………...10
• Front and rear mudguard…………………..…11
• Rear Rack………………………………………………12
• Pedals…………………………………………………..13
Crank arm, Bottom Bracket………………..........13
Battery and charger……………………………….....14
Battery care, storage and range…………..…….15
Front and Rear wheel……………..………………….16
Disc brakes…………………………………………………17
Headset………………………………………………........18
Bike stand…………………………………………………..18
Chain…………………………………………………..……..18
Brake levers………………………………………………..18
Brake and gear Cables………………………………..18
Rim, Tyres and Tubes…………………………………19
Frame and Fork (Frameset)………………………..19
Accessories…………………………………………………19
Lubrication…………………………………………..…….20
Limited Warranty……………………………………….20
List of torque recommendations………….…….20
Conversion table psi/kPa………………………….…20
Basic trouble-shooting………………….………….…21
Schematic of an ebike and its parts…………….21
Connecting the throttle………………………………22
ELECTRIC BICYCLE USER MANUAL
LEITNER ARIA 16” Light-Weight Folding Electric Bike
About this manual
• Thank you for purchasing a Leitner electric bike. We take
pride in providing electric bikes at outstanding value,
delivered to you factory direct. Riding an ebike can be
fun, however for safety reasons it is important to only
ride the bike after reading and understanding the
complete manual.
• The following manual is only a basic guide to assist you
and is not a complete or comprehensive manual of all
aspects of assembling, maintaining, repairing and using
your bicycle. In the interest of safety we recommend that
you visit a local electric bike professional to assemble,
tune and regularly service the bike.
• This manual makes no representation about the safe use
of this bike under all conditions. It is impossible to
predict all situations when riding a bike and there are
risks associated with riding this bike which cannot be
avoided. These risks are at the sole responsibility of the
rider.
• This assembly and operation manual shall remain an
integral part of the electric bicycle. When you transfer
the electric bicycle to others, please enclose this
manual as it contains important safety guidance and
operation instructions. Anyone riding the electric bike
shall carefully read the safety guidance and operation
instructions before your first ride.
Meaning of Safety Language.
Riding a bike can cause injury and in extreme cases death,
therefore it is important to read and understand the manual
before using the bike. The most common cause of injury is
falling off the bicycle and reading the manual will help to
avoid situations which put you at risk of injury or death.
• WARNING! Indicates the possibility of injury or death.
• Caution! Indicates the possibility of injury.
As there are different models of eBikes, pictures are for
reference only and may show a similar component from
another model. Certain instructions of this manual may not
apply to your model. All content in this manual is subject to
change or withdrawal without notice. We made effort to
provide accurate information, however we do not assume
responsibility of liability if any errors or inaccuracies appear.
If you are unsure about certain parts of this manual, if you
have a problem or need repair, please visit the website
www.Leitner.com.au and email a customer service
representative at sales@Leitner.com.au with a problem
description and pictures and videos or call 1300 856 725.
Important: To provide the best experience this manual is continuously updated. To make sure that you are referring to the
most up to date information download the latest version at leitner.com.au/manual
FAQ: The throttle is NOT connected by default. Please refer to this manual how to connect it.
1
Powering Your Freedom
© Leitner Pty Ltd 2020

Summary

About this Manual

Meaning of Safety Language

Explains safety terminology and warnings used throughout the manual for rider safety.

Guide to Safe Operation

Riding Conditions and Instructions

Details safe riding practices, including riding in various conditions and general riding advice.

Checklist Before Each Ride

Maintenance

Tools and Best Practice

Lists required tools and recommends professional assembly and servicing for optimal bike condition.

Maintenance Schedule

Routine Maintenance Intervals

Outlines recommended maintenance tasks based on frequency: weekly, monthly, quarterly, and annually.

Before Your First Ride

Safe Riding Rules and Preparation

Covers essential safety rules, bike fit, and preparation steps before the initial ride.

Electric Bike Operation

LCD Display and Controls

Explains the functions of the LCD display panel, including menus, settings, and button operations.

Throttle Operation

Describes how to use the thumb throttle for acceleration and safety precautions.

Getting Started

Unpacking and Assembly

Instructions for unpacking the bike, identifying parts, and initial assembly steps.

Frame Straightening and Locking

Guides on how to properly straighten and lock the folding frame mechanism before riding.

Quick Release Levers

Operating Quick Release Levers

Detailed steps on how to properly use and check quick-release levers for safety.

Handle-bar and Stem Installation

Handle-bar and Stem Setup

Procedure for installing and adjusting the handle-stem and handle-bar for riding.

Component Installation

Front Light Installation

Instructions for mounting and powering the front light on the front fork.

Bell and Reflector Installation

Guides on attaching the bell and ensuring reflectors are properly installed for visibility.

Seat (Saddle) Adjustment

Seat Inspection and Position

Covers seat inspection, adjustment for comfort, and correct seatpost insertion.

Battery and Seatpost Installation

Battery Cable Connection

Steps for connecting the battery cable to the bike's power input socket.

Mudguard Installation

Front Mudguard Installation

Instructions for fitting the optional front mudguard.

Rear Mudguard Installation

Instructions for fitting the optional rear mudguard and connecting wires.

Rear Rack Installation

Optional Rear Rack Mounting

Detailed steps for installing the optional rear rack, including different model types.

Pedal Installation

Pedal Mounting and Tightening

Procedure for correctly installing pedals onto crank arms, including left/right differences.

Crank Arms and Bottom Bracket Check

Crank Arm and Bottom Bracket Inspection

Guidance on checking and tightening crank arms and the bottom bracket for stability.

Battery Charging

Charger Indicators and Safety

Explains charger lights, charging process, safety precautions, and battery charging temperature.

Wheel Installation

Front Wheel Installation

Steps for securely installing the front wheel, including motor wire connection.

Rear Wheel Installation

Procedure for safely installing the rear wheel, ensuring proper tightening of nuts.

Disc Brakes

Braking-in Period and Operation

Information on the disc brake break-in period and how they function.

Brake Adjustment and Maintenance

Guides on adjusting disc brake clearance, alignment, and replacing brake pads.

Component Checks and Maintenance

Headset, Chain, and Bike Stand

Procedures for checking headset, chain tension, and bike stand security.

Brake Levers and Cable Systems

Covers brake lever operation, cable installation, and general cable checks.

Tyre and Rim Maintenance

Wheel Maintenance and Tire Replacement

Guidance on rim inspection, tyre/tube replacement, and wheel hub bearing checks.

Frameset Inspection and Care

Frameset Inspection and Care

Instructions for checking the frame and fork for damage and proper cleaning.

Accessory Checks

Accessory Checks

Regular checks for accessories like mudguards, lights, and racks for alignment and function.

Battery Care & Storage

Battery Care and Storage Guidelines

Recommendations for charging, storing, and handling the battery to ensure longevity and safety.

Understanding Battery Range

Factors Affecting Battery Range

Explains factors influencing e-bike range and tips to extend it.

Limited Warranty

Warranty Terms and Conditions

Summary of the limited warranty coverage, terms, and conditions for bike components.

Lubrication Guide

Lubrication Instructions

Provides instructions for lubricating various bike parts to ensure smooth operation.

Technical Specifications

Torque Values and Conversions

Lists recommended torque values for bolts and a psi/kPa conversion table.

Basic Trouble-shooting Guide

Common Faults and Solutions

A guide to diagnosing and resolving common bike issues with suggested solutions.

Connecting the Throttle

Important Legal Note on Throttle Use

Legal disclaimer regarding throttle use, compliance, and potential road legality issues.

Controller Access and Throttle Connection

Step-by-step procedure for connecting the throttle wire to the bike's controller.

Leitner ARIA Specifications

General

Brand	Leitner
Model	ARIA
Category	Bicycle
Language	English