Leitner Frankie - Final Armrest and Cable Setup; Armrest Cover Transfer; Installing Cable Latch on Left Armrest; Final Armrest and Joystick Check

© Leitner 2016
Installing the joystick on left hand side armrest
Remove the round black cover (C) on the left armrest and put it on the right armrest.
Remove the screw and washer at the back of the left armrest (arrow) and install the
cable latch. Insert the joystick console, fasten it securely with the knob and check that
both armrests are installed safely with all screws. When folding the wheelchair for the
first time, do so slowly and carefully, to make sure the cable is not stretched too much.
If it’s stretched, adjust cable tension until the wheelchair can be folded safely.
C