Leitner Frankie - Removing and Installing Batteries; Power Off Before Battery Handling; Removing the Battery; Installing the Battery

© Leitner 2016
Removing and installing the batteries
There is a small black release button
on the inside of the battery (tip of
finger). To remove the battery, push
the button with one hand and at the
same time pull the battery with the
other hand in the direction of the
arrow.
The location of the release
button shown on a removed
battery (red circle).
When sliding the battery
back in make sure the
battery is all the way in
and stable and won’t fall
out. Do not use force.
Warning: always switch wheelchair power OFF before removing or installing batteries.