6. Regular operations
6.1 Key-press guidance
HTTP://WWW.LEI ZIG.COM
23
Symbol Role Function
SET
Set
For user's parameter setting，check the status by a short
press and press "UP" to look up the set value; When the
display is for the last selection， repress "DOWN" to revert
to the main menu; In the course of set value reading，
another short press of "SET" gets into setting process，
when the setting value is flashing， press "UP" or "DOWN"
to increase or decrease the value， then validate it and
return to lookup status by a short press of “SET” again.
UP
Incr.
1、
2、
.In setting interface， a short press makes the value
increased progressively 1 by 1 and a long press gets the
rapid increment.
In the interface of fault lookup， press "UP" to leaf
through the defaults with the system
To Next Page
Loading...