What to do if the overload clutch of the PTO shaft engages on LELY HIBISCUS 485 S Farm Equipment?
If the overload clutch of the PTO shaft engages, try reducing the driving speed. Also, when raking excessive crop volume, avoid using the full width capacity of the rake.
What to do if too much soil is raked with the crop by LELY HIBISCUS 485 S Farm Equipment?
If too much soil is raked with the crop, increase the working height.
What to do if crop remains on the sides of the LELY Farm Equipment rake?
If crop remains on the sides of the rake, extend the top link. Also, you can adjust the working height or the cam track.
How to fix crop scattered behind the LELY HIBISCUS 485 S rake?
To address crop scattered behind the rake, reduce the PTO speed.
What to do if not all crop is raked from the field using LELY HIBISCUS 485 S?
If not all crop is raked from the field, adjust the working height or the height of the rotor wheel assembly.
What to do if crop remains in the middle behind the LELY Farm Equipment rake?
If crop remains in the middle behind the rake, shorten the top link.
What to do if one of the tines is broken by an excessive load on LELY HIBISCUS 485 S Farm Equipment?
If one of the tines is broken by an excessive load, replace the broken tine.
What to do if a part of the tine arms rake higher than the other tine arms on LELY Farm Equipment?
If a part of the tine arms rake higher than the other tine arms, loosen the tine arm carriage bolts of all the tine arms and retighten them according to the crosswise pattern.
Specifies the proper and intended purpose for operating the Lely Hibiscus rake.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE signal words used in safety messages.
Emphasizes operator responsibility for safe operation and maintenance.
Provides critical safety rules to follow during the operation of the rake.
Lists safety measures to be taken before and during maintenance activities.
Safety requirements and precautions when transporting the rake on public roads.
Identifies the specific positions of safety decals on the rake.
Details the meaning and purpose of each safety decal affixed to the rake.
Step-by-step guide to correctly set the length of the PTO shaft.
Overview of regular maintenance tasks and their recommended intervals.
Detailed steps for performing lubrication and other preventative tasks.
Instructions for repairing or replacing damaged components like tines or tine arms.
General| Brand | LELY |
|---|---|
| Model | HIBISCUS 485 S |
| Category | Farm Equipment |
| Language | English |
To Next Page