What to do if the overload clutch of the PTO shaft engages on LELY HIBISCUS 455?
If the overload clutch of the PTO shaft engages, try reducing the driving speed. Also, when raking excessive crop volume, avoid using the full width capacity of the rake.
What to do if too much soil is raked with the crop by LELY HIBISCUS 455?
If too much soil is raked with the crop, increase the working height.
What to do if crop remains on the sides of the LELY HIBISCUS 455 Farm Equipment rake?
If crop remains on the sides of the rake, extend the top link. Also, you can adjust the working height or the cam track.
How to fix crop scattered behind the LELY Farm Equipment rake?
To address crop scattered behind the rake, reduce the PTO speed.
What to do if not all crop is raked from the field using LELY HIBISCUS 455?
If not all crop is raked from the field, adjust the working height or the height of the rotor wheel assembly.
What to do if crop remains in the middle behind the LELY HIBISCUS 455 Farm Equipment rake?
If crop remains in the middle behind the rake, shorten the top link.
What to do if one of the tines is broken by an excessive load on LELY HIBISCUS 455?
If one of the tines is broken by an excessive load, replace the broken tine.
What to do if a part of the tine arms rake higher than the other tine arms on LELY Farm Equipment?
If a part of the tine arms rake higher than the other tine arms, loosen the tine arm carriage bolts of all the tine arms and retighten them according to the crosswise pattern.
General| Brand | LELY |
|---|---|
| Model | HIBISCUS 455 |
| Category | Farm Equipment |
| Language | English |
General safety responsibilities and the importance of training for operators.
Step-by-step guide to correctly adjust the PTO shaft length.
Guidance on initial adjustments required for the rake.
Pre-operation checks including first use, maintenance, and safety guards.
Procedures for safely attaching the rake to the tractor.
Steps to prepare the rake for safe transport.
Steps to deploy the rake for field operation.
Procedures and precautions for initiating the raking process.
Outlines the maintenance schedule based on working hours.
Details the steps for routine preventive maintenance tasks.
Procedures for fixing specific issues or replacing parts.
To Next Page