4.1059.8506.0 A
8-8 Maintenance
Figure 34. Lubricate the steering device
KEY:
1. Grease nipple of the steering device: up / down (behind the plate) - 2. Grease nipple
of the steering device: left / right
8.2.7 Lubricate the Cam Track (Standard Tine Arms)
When lubricating the cam track turn the rotor manually to spread the
grease over the entire cam track.
Requirements
• Grease pump
• Molykote BR2 Plus or equivalent
Procedure
1. Take the rake out of operation (see page 6-12).
2. Remove the screw of the tine arm cover (3) (see page 8-9).
3. Remove the cover plate from the rotor (2).
The cam track is accessible via the hole behind the tine arm cover.
4. Hold the grease pump close to the cam track (1). If the cam track
can not be reached with the grease pump, remove the tine arm to
lubricate the cam track (see page 8-17)
To Next Page
Loading...
