LELY HIBISCUS 455 - Adjust the Rake During First Use

4.1059.8506.0 A
5-2 FIRST USE
15. Deburr and clean the safety guard tubes and the PTO shaft halves.
16. Slide the two PTO shaft halves into each other.
17. Slide the inner and outer safety guard tube over the PTO shaft.
18. Connect the PTO shaft to the rake.
Figure 10. Mark the shortest working length of the PTO shaft
KEY:
1. Outer safety guard tube
B: 40 mm (1.6 in)
Figure 11. Adjust the length of the PTO shaft
5.2 Adjust the Rake during First Use
If necessary, during first use:
• Adjust the swath width (see page 7-1).
• Adjust the working height (see page 7-2).
• Adjust the cam track (see page 7-5).