4.1059.8506.0 A
Maintenance 8-19
Figure 42. Position of the tine arm bearing roller in the cam track
KEY:
1. Cam track - 2. Tine arm - 3. Tine arm bearing roller
8.3.3 Replace a Rotor Wheel
Lift the rake from the ground when you do this procedure.
Requirements
• Torque wrench
• Support
Procedure
1. Stop the tractor.
2. Engage the parking brake of the tractor.
3. Disengage the PTO.
4. Wait until all moving parts have stopped.
5. Lift the rotor to the headland position.
6. Switch off the tractor engine and remove the key.
7. Make sure that the rake can not move unexpectedly by:
• Keeping the rake connected to the tractor (with the parking
brake of the tractor engaged).
To Next Page
Loading...
