Need help?Do you have a question about the LELY LOTUS 600 and is the answer not in the manual?
General| Number of Rotors | 6 |
|---|---|
| Power Requirement | 37 kW |
| Brand | LELY |
| Model | LOTUS 600 |
| Power Source | Tractor PTO |
| Type | Tedder |
| Suitable For | Hay |
Overview of the manual's structure and topics covered.
Outlines the terms and duration of the product warranty.
Information on registering the product with the manufacturer.
Details various optional accessories available for the Lotus machine.
Explains the purpose and installation of the lowering kit.
Describes the function of warning signs for road transport visibility.
Details the lighting set for road transport safety.
Explains the gauge wheel set for optimizing tedding on uneven terrain.
Describes the spare rotor wheel mount for quick tyre changes.
Covers the use of windrowing cages for making windrows.
Explains the meaning of DANGER, WARNING, and CAUTION signal words.
Provides essential safety guidelines for operating the Lotus.
Details the meaning of various safety decals on the machine.
Shows the locations of safety decals on the Lotus.
Introduction to the hydraulic control panel and its functions.
Details the hydraulic system's functions and connections.
Step-by-step guide for connecting the Lotus to the tractor.
Procedure for safely disconnecting the Lotus from the tractor.
Instructions for transitioning the Lotus to its working configuration.
Steps to safely move the Lotus to its transport position.
Guide on how to start the tedding operation.
Instructions for initiating the windrowing process.
How to move the Lotus to the headland position for turns.
Procedure for safely stopping tedding or windrowing operations.
How to adjust the tine positions for tedding or windrowing.
Guidance on adjusting rotor wheel height for different conditions.
Instructions for setting the correct rotor angle for optimal performance.
How to adjust the width of the windrowing cages.
Specific steps for adjusting the windrowing cages.
Overview of regular maintenance tasks based on working hours.
Tasks to perform after each use of the Lotus.
Maintenance required every 10 operating hours.
Maintenance schedule for every 50 operating hours.
Maintenance required every 100 operating hours.
Maintenance tasks for every 250 operating hours.
Maintenance needed every 500 operating hours.
Procedures for maintenance before long-term storage.
Tasks to perform after the machine has been stored for a long period.
General preventive maintenance procedures for the Lotus.
Steps for cleaning the Lotus machine.
Instructions for greasing the drive line.
How to grease the pivot points on the Lotus.
Guide to lubricating the PTO shaft.
Procedure for replacing the gearbox grease.
Procedures for fixing issues or worn parts.
Steps for replacing worn or broken tines.
How to adjust the deflection of the rotors.
Table specifying standard torque loads for bolts and nuts.
Diagram showing recommended tyre pressures for the Lotus.
To Next Page