LELY LOTUS 600 - 5.2.4 Lubricate the PTO shaft

5.2.4 Lubricate the PTO shaft
Requirements
• Grease pump
•
Biodegradable grease (Total Biomultis SEP2 or equivalent)
Refer to the third party documentation for detailed information to grease the
type of PTO shaft. The important grease points for all the type of PTO-shafts
are described in the next procedure.
Procedure:
1. Verify the types of PTO shaft on the Lotus.
2. Grease the following grease points of the PTO shaft(s) with the
grease pump:
• The grease nipple (A),
• The guard bearing (B),
• The profiled tubes (C).
Type PTO A B C
W 100. h. 100 h. 100 h.
A. Grease nipple - B. Guard bearings - C. Profiled tube
Figure 30. Grease Points PTO shaft (type W)
CAUTION
Maintenance 5-5
4.1046.8504.0 A