Need help?Do you have a question about the LELY SPLENDIMO 240 MC and is the answer not in the manual?
General| Type | Mower Conditioner |
|---|---|
| Working width | 2.4 m |
| Number of rotors | 2 |
| Required tractor power | 50 HP |
| Mounting | Three-point hitch |
Adjusts the cutting height by tilting the cutter bar forward or backward using the top link.
Adjusts conditioning intensity via the crop inlet plate and rotor speed for optimal crop treatment.
Sets ground pressure using a tension spring and stop plate for optimal ground contour following.
Adjusts the swath width by changing the opening of the swath-board.
Tasks include cleaning, checking tightness of knives/discs, and applying anti-corrosion agent.
Details greasing intervals and points for PTO shafts, main shaft, spring arm, and pivot points.
Covers checks before season, before storage, and during heavy use, including V-belts and breakback device.
Explains how to safely replace mower knives while maintaining disc balance and ensuring correct fitting.
Provides procedures and oil quantities for changing oil in gearboxes and drive elements.
Details the process for replacing grease in mower elements, including dismounting, cleaning, and reassembly.
Step-by-step guide for dismantling and reassembling the cutter bar unit and its components.
Instructions for removing and refitting mower discs on a drive element, including torque specifications.
Explains how to adjust the crop inlet plate to four positions to manage crop flow and prevent jamming.
Describes how to change rotor speed by swapping pulleys for optimal conditioning performance.
To Next Page