EasyManua.ls Logo

LELY SPLENDIMO MC User Manual

LELY SPLENDIMO MC
96 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HANDLEIDING
SPLENDIMO MC
Ehn014-a
SPLENDIMO
®
is een geregistreerde merknaam waarvan het uitsluitend gebruiksrecht toekomt aan
ondernemingen van de Van der Lely-organisatie.
©2001. Alle rechten voorbehouden. Niets uit deze uitgave mag worden verveelvoudigd en/of openbaar
gemaakt door middel van druk, fotokopie, microfilm of op welke wijze ook, zonder voorafgaande
schriftelijke toestemming van LELY INDUSTRIES N.V.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the LELY SPLENDIMO MC and is the answer not in the manual?

LELY SPLENDIMO MC Specifications

General IconGeneral
Number of Discs8
Maximum Speed (Transport)40 km/h
Cutting SystemDiscs
Fuel Tank CapacityN/A (Trailed)
Hydraulic SystemTractor hydraulic system

Summary

PREFACE

WARRANTY CONDITIONS

TYPE- AND SERIAL NUMBER OF YOUR MACHINE

SAFETY INSTRUCTIONS

EXPLANATION OF SAFETY DECALS ON THE MACHINE

Explains the meaning and importance of safety decals on the machine.

1 INTRODUCTION

2 MOUNTING BEHIND THE TRACTOR

3 TRANSPORT

4 MACHINE ADJUSTMENTS

4.1 Ground Pressure Adjustments

Details how to adjust the ground pressure of the mower using the wrenching bolt.

4.2 Mowing Height

Explains how to adjust the mowing height by altering the cutter bar's forward inclination.

4.3 Intensity of Conditioning

Describes adjusting conditioning intensity via the crop inlet plate and rotor speed.

4.4 Swath Width

Details how to adjust the swath width by manipulating the swath boards.

5 OPERATING THE MACHINE

6 DISMOUNTING FROM THE TRACTOR

7 MAINTENANCE

7.1 Maintenance After Operations

Covers tasks after finishing work, including cleaning, checks, and rust prevention.

7.2 Lubrication

Details lubrication schedules for PTO shafts, drive elements, pivots, and bearings.

7.3 Intermittent Maintenance

Outlines maintenance tasks at the start of season, before storage, and during heavy use.

7.4 Replacement of Knives

Provides instructions for replacing mower knives, including types, torque, and balancing.

7.5 Change of Oil in Gearboxes

Specifies oil change intervals and quantities for gearboxes and drive elements.

7.6 Change of Grease in Mower Elements

Details the procedure and frequency for replacing grease in mower elements.

Supplement A Cutter Bar Assembly/Disassembly

Supplement B Technical Details

Related product manuals