EN-19
7.5 Change of oil in gearboxes
Change the oil of the gearboxes or drive element of a new mower (or
after assembly of a new gearbox) for the first time after
approximately 30 working hours, and every 250 working hours
thereafter.
- Place a receiving container underneath the gearbox.
- Unscrew the drain plug (arrow, fig. 25, 26) from the gearbox and
let the oil flow into the receiving container.
- Fill the gearbox A (fig. 25) with 1.7 l of GX85W-140
transmission oil.
- Fill the gearbox B (fig. 26) with 0.85 l of GX85W-140
transmission oil.
- Fill the drive element C with a carefully measured quantity of
0.45 l of GX85W-140 transmission oil.
An incorrect oil quantity could make the gearbox overheat and
cause damage.
Change the oil more often when operating the machine in
extreme working conditions.
25
A: 1.7 l
26
B: 0.85 l
C: 0.45 l
To Next Page
Loading...